F/S: Carbon Fiber Shift Stick & Bowler Billet 5-spd knob for Tremec etc

[67L88Vette]

For Sale: I recently switched out this shift stick and knob when I moved from a five speed to a six speed, and no longer need these very trick parts. The shift stick is a true CF rod with the billet ends firmly attached. It is a gray CF color, as opposed to the brown CF. The stick is extremely strong, and lightweight, coming in at 3 oz. I was using a black billet 5-speed knob from Bowler, in the Tremec pattern with reverse down and on the right. The knob weighs 5.5 oz, so the two together come in at 9 oz. The stick and knob have an overall length of 9.5" from the top of the knob to the bottom of the shift stick, and the distance from the center of the knob to the center of the topmost mounting bolt hole is ~7.5". The stick is universal fit, as the bottom of the stick is slotted to cover a variety of mounting bolt distances. I have used it on both a Tremec 3550 and a ROD trans. The knob will need some shimming to have the pattern align with the shift lever correctly. No big deal as there are a number of ways to do this depending on your tastes ... I'd like to sell the two together, and am asking $125 for both shipped to your door in the lower 48 United States. PM me to claim them or ask questions, and thanks for looking ...

[67L88Vette]

Still have this shift lever & knob ... Happy to receive offers ...
John A, 67L88Vette

[67L88Vette]

Bump to the top ...
John A, 67L88Vette

[67L88Vette]

Sale pending ....
John A, 67L88Vette

[67L88Vette]

SOLD!! Thanks Jim!!

[jimco84x]

SOLD!! Thanks Jim!!

Thank you!!

[jimco84x]

Delivered on time and as expected. Thanks John

[67L88Vette]

Thank you, Jim!

John A