Results 1 to 4 of 4
  1. #1
    Join Date
    Jan 2016
    Posts
    78
    Country Flag: United States

    Mounting plates for a first gen jig?

    I'm in the process of building a jig for first gens. I've got got it ballpark figured out how it's going together but, can't find any good pics for the best way to fabricate the mounting points for the front and rear framerails. Does anyone have any pics of how they did their's and the exact mounting points on the frame rail? Any help would be appreciated.



  2. #2
    Join Date
    May 2010
    Location
    kitchener,Ontario,Canada
    Posts
    1,927
    Country Flag: Canada
    Check out some youtube videos . AMD install center has some videos you might be able to steal some ideas from
    Spinnin'my tires in life's fast lane

    Ryan Austin
    On twitter @raustinss
    On Instagram austinss70

  3. #3
    Join Date
    Nov 2006
    Location
    Mountain Springs, Texas
    Posts
    3,050
    Country Flag: United States
    1969 Camaro - LSA 6L90E AME sub/IRS
    1957 Buick Caballero - huge project
    1959 El Camino - Ironworks frame
    1969 Mustang Sportsroof
    1956 Cameo - full C5 suspension/drivetrain

  4. #4
    Join Date
    Jan 2016
    Posts
    78
    Country Flag: United States
    Thanks guys for the replies. I watched alot of youtube videos awhile back before I decided on the design. I ended going with a design someone had posted on there. I believe his username was "Mr. Fireman". He's got alot of helpful stuff on his channel.