Results 1 to 7 of 7
-
09-18-2019 #1Registered User
- Join Date
- Jul 2017
- Location
- Nashville, TN
- Posts
- 97
AAW and GMPP Starter wiring question
Running an AAW update kit along with a GMPP connect and cruise setup. I don’t want to run two separate power wires from the battery to the other side of the car for the GMPP fuse panel and the starter. My thought is to run from the positive battery post to the GMPP power in stud and then from the power in stud to the starter like pictured below. Does anyone see a problem with this idea, should I just run two separate wires and just be done with it? I do plan on putting a fused power distribution block near the positive battery post that is not pictured.