Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 3 of 3
    1. #1
      Join Date
      Dec 2005
      Location
      TuoCo, CA
      Posts
      992
      Country Flag: United States

      AFX Spindle C7 Hub Question

      I have an early pair of ATS AFX Spindles with the small bearing C5/6 hubs.
      I see that SpeedTech is using the larger C7 hubs in the AFX spindle now.
      Is the C7 hub an easy swap or have they changed the machining to accept the C7 hub?
      Steve
      '68 Camaro - SBC, TKO600, 3.73 Moser 12-bolt, Speedtech, ATS-AFX, Hotchkis, Forgeline, Ron Davis and C5 brakes (Kore3), Holley Terminator TBI.
      Check it Out Here

    2. #2
      Join Date
      Oct 2016
      Posts
      244
      From my understanding the older spindle can accept the new hub no difference in the machining. Best to call Speedtech directly.

    3. #3
      Join Date
      Mar 2017
      Posts
      3
      I believe my dse clip with c6 knuckles has c7 bearings.





    Advertise on Pro-Touring.com