Results 1 to 7 of 7
-
08-25-2019 #1Registered User
- Join Date
- Nov 2017
- Posts
- 6
Hand brake for Buick Grand National with Corvette z06 caliper conversion
Hello,
I have a 87 Buick Grand National that I had the rear drums converted to C6 Z06 calipers using Kore 3 brackets and lost the ebrake. Wondering if any one has figured out a way to install an ebrake ?
-
08-26-2019 #2Registered User- Join Date
- Mar 2005
- Posts
- 345
With the park brake in a drum there is likely a lever that is used to apply them. I did this too many years ago to really remember, and it was using the '98 - '02 Camaro brakes.
The backing plates and such were swapped side-to-side as in the stock configuration the levers were pulled from the back of the car. This changed it to pull from the front.
Made two brackets that used a bolt on the flange, along with two gadgets to connect the cable end to the brake lever. The brackets were slotted so that they could be adjusted.
Bob.
08-30-2019 #3