Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 5 of 5
    1. #1
      Join Date
      Jun 2010
      Location
      Deployed
      Posts
      3,280
      Country Flag: United States

      C6 Hub / ARP studs

      Is there a direct replacement ARP 1/2” wheel stud for C6 hubs? Meaning you don’t have to oversized the hub’s holes etc.

      1970 Camaro/DSE build


      Are you driver enough? Maybe....come on blue!
      https://www.pro-touring.com/threads/...71#post1147371


    2. #2
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,603
      Country Flag: United States
      Of all the things I found wanting on my C6, the wheel studs weren't one of them. And the factory holes are .509, so 1/2" screw in studs will probably work fine if accurately machined, especially if you are using hub-centered wheels.

      Are you looking to match the fronts, or just want longer studs? If you are looking for longer 12mm studs, Moroso and ARP make them.
      Last edited by parsonsj; 08-17-2019 at 09:13 AM.
      John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro

    3. #3
      Join Date
      May 2013
      Location
      Colton Ca.
      Posts
      623
      Country Flag: United States
      ARP part number 100-7730 should work ? Is there a differences in the knurl diameter in c5 vs c6 ? The ones I posted are a short version and show they're for "convertible" but again I don't the difference in hub. They look like a direct replacement. I'll probably try these for my 70 camaro build with c5 hub.

      I used the arp 1/2- 20 x 3" long on my 68 camaro with speedtech extreme subframe and just drilled them out with a 39/64 drill bit for .625 knurl here at my home with no fancy tools and they pressed in perfectly fine.
      Ahmad B.

    4. #4
      Join Date
      Dec 2005
      Location
      TuoCo, CA
      Posts
      992
      Country Flag: United States
      I've heard these are good for C5 but not C6

      https://www.summitracing.com/parts/arp-100-7731
      Steve
      '68 Camaro - SBC, TKO600, 3.73 Moser 12-bolt, Speedtech, ATS-AFX, Hotchkis, Forgeline, Ron Davis and C5 brakes (Kore3), Holley Terminator TBI.
      Check it Out Here

    5. #5
      Join Date
      May 2013
      Location
      Colton Ca.
      Posts
      623
      Country Flag: United States
      Quote Originally Posted by eville View Post
      I've heard these are good for C5 but not C6

      https://www.summitracing.com/parts/arp-100-7731
      I thought I remembered seeing those! ARP came out with those after I did mine. At the time there was no solution. you can buy the ones posted above and cut them if needed.
      Ahmad B.





    Advertise on Pro-Touring.com