Results 1 to 3 of 3
Thread: LS2 ticking
-
08-10-2019 #1
Registered User
- Join Date
- Nov 2010
- Posts
- 251
LS2 ticking
I’m getting to being done with the build and little problems are popping up. I’ve been starting the engine for months and have put about 50 miles on it. Today I started it and there was a little tick that got louder and faster when the engine was revved. After it heated up I started the engine and no ticking. Any ideas? Thanks
-
08-11-2019 #2
Registered User
- Join Date
- Nov 2006
- Location
- Mountain Springs, Texas
- Posts
- 4,500
Sounds like piston slap:
https://ls1tech.com/forums/generatio...-engineer.html
Don1969 Camaro - LSA 6L90E AME sub/IRS
1957 Buick Estate Wagon
1959 El Camino - Ironworks frame
1956 Cameo - full C5 suspension/drivetrain
1959 Apache Fleetside
-
08-11-2019 #3
Registered User
- Join Date
- Nov 2010
- Posts
- 251
Awesome! Thanks for the help. The problem with DBW is I can not rev the engine while leaning over the engine bay. I’m going to try and pin point it today when I get some help.
-
Reply With Quote
