Results 1 to 3 of 3
Thread: Raybestos track pads
-
07-26-2019 #1
Registered User
- Join Date
- Nov 2016
- Location
- Sulphur, La
- Posts
- 599
Raybestos track pads
I wanted to take some time to bring these pads to the attention of anyone that may not familiar with them. I was turned on to these back when I was racing wheel to wheel. For my application I was running a 98 Cobra Mustang with factory 13" PBR brakes (with ducting) & would race 1 hour road course races. Before these I had run a couple other pads including the high dollar carbo tech ones. The Raybestos pads worked at least as good as anything I have run. Good bite when cold and never seemed to overheat. I also ran over half a season on the same rotors and they were still within tolerance. These pads are very reasonably priced and do not take special rotor prep.
-
07-26-2019 #2
Registered User
- Join Date
- Sep 2010
- Location
- Beach Park IL
- Posts
- 2,849
I assume you were running ST3s?
Donny
Support your local hot rod shop!
-
07-26-2019 #3
Registered User
- Join Date
- Nov 2016
- Location
- Sulphur, La
- Posts
- 599
I am almost positive I ran the St-43 front & rear. I have to recant on price though, I just looked and they have gone up a lot in price since I bought any. I was trying to help with a good low cost option but if I had looked up the price I probably would not have posted.
-
Reply With Quote
