New Billet Specialties LS Valve Cover Conversion Kit for Big Block Chevy Valve Cover

[Billet-Specialties]

Coils are Ugly! Hide them and give your modern LS classic style with Billet Specialties LS valve cover conversion kits.
This kit allows the use of perimeter style Big Block Chevrolet valve covers on an LS motor while hiding the coils underneath for a classic clean look. Recessed wire channels drop the wires where you need them for ease of installation.

Product Features;

• Precision machined from 6061-T6 aluminum
  
• Works with either Round LS3 coils (AC Delco D14A) or Flat LS3 coils (AC Delco D510C)
  
• Retains OEM LS gasket for a leak free seal
  
• Recessed wire channels
  
• Hidden oil fill cap (1 each side)
  
• ¼” NPT Breather Vent in the back of each
  
• Stainless Hardware included
  
• Made in the USA

UPC Code: 800770109794

For More Information Click Here

[GS455vert]

Slick!

[frankv11]

Love the look , any idea if they would fit LS6 with magnacharger , clearances for fuel rails etc ..?

[ORBandit]

If we could only get some LS conversion kits for Pontiac covers now....

[frankv11]

Ended up making my own BIG block Chevy Ls coil covers for my 1969 camaro . No need to relocate oil filler neck , coils or valve covers . Very tight clearances and fitment I love the new look

[badazz81z28]

These are just ugly. A valve cover that’s bigger than the head? It looks horrible. The design Holley and Wegner are using is much better. It covers the coils, but it’s not weirdly large.

https://www.jegs.com/i/Holley/510/24...4aAt3bEALw_wcB

[frankv11]

These are just ugly. A valve cover that’s bigger than the head? It looks horrible. The design Holley and Wegner are using is much better. It covers the coils, but it’s not weirdly large.

https://www.jegs.com/i/Holley/510/24...4aAt3bEALw_wcB

I love your honest opinion but to each it’s own , the whole point of it it’s to make my LS have the BBC look and feel and yes it’s a coil cover not a valve cover assembly

[badazz81z28]

I love your honest opinion but to each it’s own , the whole point of it it’s to make my LS have the BBC look and feel and yes it’s a coil cover not a valve cover assembly

yes, if the BBC look is what you’re looking for, absolutely. If you’re just looking for a stylish look that covers the coils and that’s it, that’s Holley and Wegner right now.

[badazz81z28]

yes, if the BBC look is what you’re looking for, absolutely. If you’re just looking for a stylish look that covers the coils and that’s it, that’s Holley and Wegner right now.

looks like Billet Specialities has the 2 piece covers too, but $1000!

[John McIntire]

The thing that scares me about these valve covers is encasing the coils and trapping in all that heat.

[badazz81z28]

The thing that scares me about these valve covers is encasing the coils and trapping in all that heat.

Do the coils get hot? I saw that even Lingenfeter has a set...would really like to know.

[badazz81z28]

Do the coils get hot? I saw that even Lingenfeter has a set...would really like to know.

Contacted Holley, they said after exhaustive testing they didn’t see any concerns with ventilation or heat. Some air slots couldn’t hurt IMO.

[frankv11]

Part of my desigh and purpose being a cover is not completely incased but I would guess that if heat was issue. it would of surfaced a long time ago. Since these full closed set ups been around for a while