Results 1 to 6 of 6
-
06-18-2019 #1Registered User
- Join Date
- Dec 2017
- Posts
- 4
Retrofit of wheel speed sensor into spindles
Has anyone done or seen a good integration of wheel speed sensors and reluctor wheels into a classic front spindles and aftermarket brake setup? Use of a modern spindle and hub like the corvette style is not an option for me. I'm attempting to setup traction control. For aftermarket traction control and VSS i have seen use of rotor vanes and wheels studs with reported success but that would not be a good enough signal for some ECU systems or OE computers.