Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 4 of 4

    Hybrid View

    1. #1
      Join Date
      Sep 2014
      Location
      Wisconsin
      Posts
      21

      LSA swap in 1st gen - Upper Radiator Hose with CTS-V Water Pump

      Good morning everyone. I've done some searches and it seems all the recommended radiator hoses posts come from those with a standard vette or F-body water pump. The LSA/CTS-V water pump outlet is further away from that typical passenger side radiator location for the upper hose which means that NAPA part number is quite a bit short.

      What part numbers has everyone been using? I am looking for a molded hose, not an AN fitting setup. If it comes to it I'll just cut the NAPA hose and put a fill/cap in to extend it that 4-5" that I need but wanted to check with everyone here first.

      Thanks!



    2. #2
      Join Date
      Jan 2007
      Location
      CT
      Posts
      782
      Country Flag: United States
      i used 71989 hose which needed to be cut to size but fit nice.
      ________________
      Nick S.
      Gold/Gray 1967 Camaro

    3. #3
      Join Date
      Sep 2014
      Location
      Wisconsin
      Posts
      21
      Thanks Nick. Do you have an engine bay pic of your car? I tried searching your old posts but didn't seem like they loaded the pics. Just ordered it to try out since its cheap.

      Thanks!

    4. #4
      Join Date
      Jan 2007
      Location
      CT
      Posts
      782
      Country Flag: United States
      this is the best i could find of it.
      ________________
      Nick S.
      Gold/Gray 1967 Camaro





    Advertise on Pro-Touring.com