Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 2 of 2
    1. #1
      Join Date
      Jul 2013
      Location
      N. Scottsdale
      Posts
      376
      Country Flag: United States

      MC pushrod recommendation

      Wondering what master cylinder pushrod to use. 70 Firebird, running a manual setup, w/factory brake pedal (top hole) and 15/16 Baer Remaster. Was going to order the universal kit from Wilwood and a boot from Inline Tube, but thought I'd check to see if there's a better option.

    2. #2
      Join Date
      Jun 2006
      Location
      Katy,TX
      Posts
      1,678
      On my 79 Camaro I used a heim and then a generic rod threaded in that came with a clevis. I tossed the clevis.My 79 the pedal is not centered in the MC and a power booster only bolts to the left side because it is not centered. Upper hole was about 7/16 and Heim was only 3/8 so I made a small sleeve for the pedal.

      1978 Black Trans Am 455 Edelbrock heads [email protected] through mufflers on pump gas
      1981 Trans Am 400 stock type motor
      79 Camaro getting a 500" 695 hp IA2 Pontiac motor
      1965 GTO project car
      470ci/Chevy dual quad 409 604 HP 64 Impala SS project
      2004 Pulse Red GTO




    Advertise on Pro-Touring.com