Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2013
    N. Scottsdale
    Country Flag: United States

    MC pushrod recommendation

    Wondering what master cylinder pushrod to use. 70 Firebird, running a manual setup, w/factory brake pedal (top hole) and 15/16 Baer Remaster. Was going to order the universal kit from Wilwood and a boot from Inline Tube, but thought I'd check to see if there's a better option.

  2. #2
    Join Date
    Jun 2006
    On my 79 Camaro I used a heim and then a generic rod threaded in that came with a clevis. I tossed the clevis.My 79 the pedal is not centered in the MC and a power booster only bolts to the left side because it is not centered. Upper hole was about 7/16 and Heim was only 3/8 so I made a small sleeve for the pedal.

    1978 Black Trans Am 455 Edelbrock heads [email protected] through mufflers on pump gas
    1981 Trans Am 400 stock type motor
    79 Camaro getting a 500" 695 hp IA2 Pontiac motor
    1965 GTO project car
    470ci/Chevy dual quad 409 604 HP 64 Impala SS project
    2004 Pulse Red GTO