Results 1 to 6 of 6
Threaded View
-
06-06-2019 #1
Registered User
- Join Date
- Jul 2011
- Location
- Nashville/ Tampa
- Posts
- 724
Hooker 70201310-RHKR Chevelle LS swap headers and connector pipes $450
Selling a set of these:
https://www.holley.com/products/exhaust/headers_and_exhaust_manifolds/mid_length/parts/70201310-RHKR with the connector pipes (that cost an extra $120 or so and have the O2 sensor bungs in them). I put them on my car for 200 miles or so before I decided to pull my LS and do an LT1 swap. One of them still has an O2 sensor in it which you can have.
These are designed for Chevelle/ Cutlass/ other A body but would probably fit a variety of other older vehicles with similar engine bays.
Shipping is fine, these aren't too terribly heavy but the cost is on you. I'll use bikeflights which is generally pretty cheap.
Located in Spring Hill, FL a bit north of Tampa. Also have some front lower ridetech strongarms for Chevelle as well for $300.
Only trades I'd be interested in would be Hobie kayak with Mirage drive.
Thanks for looking
https://www.instagram.com/gen_v_lt1_chevelle/
Do not buy anything from Frankie's Used Auto Parts. Ever.
Chevelle ̶a̶l̶m̶o̶s̶t̶ ̶f̶i̶n̶i̶s̶h̶e̶d̶ L92/200-4r now Gen V LT1 and T56- https://ls1tech.com/forums/conversio...nvertible.html
-
Reply With Quote
