Results 1 to 7 of 7
  1. #1
    Join Date
    Feb 2010
    Location
    NE Arkansas
    Posts
    600

    Default 1967-1969 Camaro Speaker Kick Panels and Package Trays FS

    Custom Fiberglass speaker package tray and Kick panels for 1967-1969 Camaro and firebirds


    I only make a few of these while the weather cooperates with me...I'm not a business that makes these year round.....These are listed on other sites as well so quantity or availability can change any time. I'll try to keep the post updated.

    I will just make a couple here and there from time to time and update this thread as much as I can - thanks



    Speaker Package Tray for 67-69 Camaro's and Firebirds



    • Shipped as pictured, ready for you to finish the grilles and cover to your liking. Grilles are made of 1/2" mdf.
    • There is room for speakers on the outside locations and a spot in the center to utilize for a subwoofer port or opening for speaker to play through.
    • Some minor blemish and prep needed for paint. To be expected from fiberglass parts pulled from a mold.
    • Perfect for a show car or that pro-touring restomod
    • Ships in a custom built crate 55" x 16" x 2" to protect from damage and tracking provided





    $189 + shipping each ...shipping typically runs around $37-47 depending on location with California being the highest shipping rates. Just contact me for a quote.





    Speaker Kick Panels for 67-69 Camaro and Firebird's



    • Made of fiberglass in gelcoat and primer
    • Comes with kick panels, pinch weld and mdf grill blanks, you finish with your own vinyl, paint, and grill cloth.
    • Keep speakers out of your doors and have a nice low-key place to install them instead. When you use the supplied grill blanks and wrap in grill cloth speakers will disappear into the interior.
    • Pinch weld replaces the trim that runs along the jamb and panel sits against that.
    • Fits up to a 6.5" speaker and tweeter
    • Speaker resides in the area where the factory kick panel vents were, you will lose the pull cables in the factory kicks.
    • You can use use a Metra 81-6900 Baffle behind the speaker to protect it from the elements. These can be purchased on ebay for around $10 shipped.
    • No Speakers are included, these are raw panels ready for you to finish and add your own speakers
    • Some prep will be needed as you would any fiberglass part if your wanting to paint these. Expect some minor imperfections for something that comes out of a mold.
    • Some trimming required to get a tight fit to your car
    • Holds a component set with a tweeter and up to a 6.5? speaker
    • May work with Factory AC but you need to remove the flapper actuator in the passenger kick panel and cap off the vacuum line. But these work best with aftermarket AC systems. Do your research.
    • Non-AC Owners: Will work on Non-AC Cars IF you completely remove the cable vent pull knobs and rods. but nothing is permanent and can be reversed if you sell the car.
    • If you have Vintage air that runs hoses through the passenger kick panel you will have to relocate the hoses above the kick panel.






    1969 Owners PLEASE READ


    These kick panels were made from a set of 67-68 style kick panels do they are a direct fit for those years. 1969 kick panels are physically the same size but there is some differences at the front top edge where it meets the dash.


    It's nothing major, but EXPECT to do some minor trimming for these to fit a 1969 Camaro





    $150 + shipping each for the kickpanels





    Please note, I do not sell either of these "finished and ready to install" You will need to be prepared to do it yourself or have someone ready to fit and wrap these in vinyl or paint - thanks

    Pics of them finished and installed are for reference only


    Name:  2018-09-15 16.50.26.jpg
Views: 344
Size:  152.0 KBName:  2018-09-15 16.50.35.jpg
Views: 346
Size:  171.0 KBName:  2018-09-15 16.50.41.jpg
Views: 343
Size:  181.4 KBName:  2018-09-15 16.50.55.jpg
Views: 341
Size:  175.9 KBName:  2018-09-15 16.51.30.jpg
Views: 343
Size:  158.6 KBName:  2016-03-06 16.47.02_zpsakmspnpv.jpg
Views: 338
Size:  64.8 KBName:  2016-03-06 16.47.07_zps4sbtgisb.jpg
Views: 339
Size:  73.4 KBName:  2016-02-03 07.00.26_zpskm1dbigb.jpg
Views: 340
Size:  88.5 KBName:  2015-05-25 11.10.00.jpg
Views: 336
Size:  95.5 KBName:  $_121.jpg
Views: 337
Size:  30.0 KBName:  $_123.jpg
Views: 336
Size:  25.6 KB
    My build thread

    http://www.nastyz28.com/forum/showthread.php?t=241037

    Paint Jail Experience

    https://sites.google.com/site/paintjail/home


  2. #2
    Join Date
    Feb 2010
    Location
    NE Arkansas
    Posts
    600

    Default

    Currently I have one (1) Tray available and one (1) pair kick panels available ready to ship
    My build thread

    http://www.nastyz28.com/forum/showthread.php?t=241037

    Paint Jail Experience

    https://sites.google.com/site/paintjail/home

  3. #3
    Join Date
    Mar 2008
    Location
    L.A. dba Fairhope AL
    Posts
    81
    Country Flag: United States

    Default

    Dennis
    I sent a pm on the package shelf.
    Thanks
    Matt

  4. #4
    Join Date
    Jul 2018
    Location
    Ontario Canada
    Posts
    34
    Country Flag: Afghanistan

    Default

    Iíll take the kick panels

  5. #5
    Join Date
    Feb 2010
    Location
    NE Arkansas
    Posts
    600

    Default

    Quote Originally Posted by camuchi View Post
    Dennis
    I sent a pm on the package shelf.
    Thanks
    Matt
    Replied to ya, thanks again

    Dennis
    My build thread

    http://www.nastyz28.com/forum/showthread.php?t=241037

    Paint Jail Experience

    https://sites.google.com/site/paintjail/home

  6. #6
    Join Date
    Feb 2010
    Location
    NE Arkansas
    Posts
    600

    Default

    Quote Originally Posted by Ssoroka9869 View Post
    I’ll take the kick panels
    The easiest (and cheapest) way to get them is through me on eBay. The overall shipped price will be lower with eBays shipping program buying them directly from me and shipping them usps.

    https://www.ebay.ca/itm/1967-1969-Ca...VXIfkl&vxp=mtr
    My build thread

    http://www.nastyz28.com/forum/showthread.php?t=241037

    Paint Jail Experience

    https://sites.google.com/site/paintjail/home

  7. #7
    Join Date
    Feb 2010
    Location
    NE Arkansas
    Posts
    600

    Default

    still have a couple of speaker kicks and a tray FS
    My build thread

    http://www.nastyz28.com/forum/showthread.php?t=241037

    Paint Jail Experience

    https://sites.google.com/site/paintjail/home



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •