Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 18 of 18
    1. #1
      Join Date
      Feb 2010
      Location
      NE Arkansas
      Posts
      616

      1967-1969 Camaro Speaker Kick Panels and Package Trays FS

      Custom Fiberglass speaker package tray and Kick panels for 1967-1969 Camaro and firebirds


      I only make a few of these while the weather cooperates with me...I'm not a business that makes these year round.....These are listed on other sites as well so quantity or availability can change any time. I'll try to keep the post updated.

      I will just make a couple here and there from time to time and update this thread as much as I can - thanks



      Speaker Package Tray for 67-69 Camaro's and Firebirds



      • Shipped as pictured, ready for you to finish the grilles and cover to your liking. Grilles are made of 1/2" mdf.
      • There is room for speakers on the outside locations and a spot in the center to utilize for a subwoofer port or opening for speaker to play through.
      • Some minor blemish and prep needed for paint. To be expected from fiberglass parts pulled from a mold.
      • Perfect for a show car or that pro-touring restomod
      • Ships in a custom built crate 55" x 16" x 2" to protect from damage and tracking provided



      $189 + shipping each ...shipping typically runs around $37-47 depending on location with California being the highest shipping rates. Just contact me for a quote.





      Speaker Kick Panels for 67-69 Camaro and Firebird's



      • Made of fiberglass in gelcoat and primer
      • Comes with kick panels, pinch weld and mdf grill blanks, you finish with your own vinyl, paint, and grill cloth.
      • Keep speakers out of your doors and have a nice low-key place to install them instead. When you use the supplied grill blanks and wrap in grill cloth speakers will disappear into the interior.
      • Pinch weld replaces the trim that runs along the jamb and panel sits against that.
      • Fits up to a 6.5" speaker and tweeter
      • Speaker resides in the area where the factory kick panel vents were, you will lose the pull cables in the factory kicks.
      • You can use use a Metra 81-6900 Baffle behind the speaker to protect it from the elements. These can be purchased on ebay for around $10 shipped.
      • No Speakers are included, these are raw panels ready for you to finish and add your own speakers
      • Some prep will be needed as you would any fiberglass part if your wanting to paint these. Expect some minor imperfections for something that comes out of a mold.
      • Some trimming required to get a tight fit to your car
      • Holds a component set with a tweeter and up to a 6.5? speaker
      • May work with Factory AC but you need to remove the flapper actuator in the passenger kick panel and cap off the vacuum line. But these work best with aftermarket AC systems. Do your research.
      • Non-AC Owners: Will work on Non-AC Cars IF you completely remove the cable vent pull knobs and rods. but nothing is permanent and can be reversed if you sell the car.
      • If you have Vintage air that runs hoses through the passenger kick panel you will have to relocate the hoses above the kick panel.






      1969 Owners PLEASE READ


      These kick panels were made from a set of 67-68 style kick panels do they are a direct fit for those years. 1969 kick panels are physically the same size but there is some differences at the front top edge where it meets the dash.


      It's nothing major, but EXPECT to do some minor trimming for these to fit a 1969 Camaro





      $150 + shipping each for the kickpanels





      Please note, I do not sell either of these "finished and ready to install" You will need to be prepared to do it yourself or have someone ready to fit and wrap these in vinyl or paint - thanks

      Pics of them finished and installed are for reference only


      Name:  2018-09-15 16.50.26.jpg
Views: 2238
Size:  152.0 KBName:  2018-09-15 16.50.35.jpg
Views: 2182
Size:  171.0 KBName:  2018-09-15 16.50.41.jpg
Views: 2219
Size:  181.4 KBName:  2018-09-15 16.50.55.jpg
Views: 2278
Size:  175.9 KBName:  2018-09-15 16.51.30.jpg
Views: 2221
Size:  158.6 KBName:  2016-03-06 16.47.02_zpsakmspnpv.jpg
Views: 2145
Size:  64.8 KBName:  2016-03-06 16.47.07_zps4sbtgisb.jpg
Views: 2135
Size:  73.4 KBName:  2016-02-03 07.00.26_zpskm1dbigb.jpg
Views: 2165
Size:  88.5 KBName:  2015-05-25 11.10.00.jpg
Views: 2215
Size:  95.5 KBName:  $_121.jpg
Views: 2158
Size:  30.0 KBName:  $_123.jpg
Views: 2190
Size:  25.6 KB
      My build thread

      http://www.nastyz28.com/forum/showthread.php?t=241037

      Paint Jail Experience

      https://sites.google.com/site/paintjail/home

    2. #2
      Join Date
      Feb 2010
      Location
      NE Arkansas
      Posts
      616
      Currently I have one (1) Tray available and one (1) pair kick panels available ready to ship
      My build thread

      http://www.nastyz28.com/forum/showthread.php?t=241037

      Paint Jail Experience

      https://sites.google.com/site/paintjail/home

    3. #3
      Join Date
      Mar 2008
      Location
      L.A. dba Fairhope AL
      Posts
      99
      Country Flag: United States
      Dennis
      I sent a pm on the package shelf.
      Thanks
      Matt

    4. #4
      Join Date
      Jul 2018
      Location
      Ontario Canada
      Posts
      69
      Country Flag: Afghanistan
      I’ll take the kick panels

    5. #5
      Join Date
      Feb 2010
      Location
      NE Arkansas
      Posts
      616
      Quote Originally Posted by camuchi View Post
      Dennis
      I sent a pm on the package shelf.
      Thanks
      Matt
      Replied to ya, thanks again



      Dennis
      My build thread

      http://www.nastyz28.com/forum/showthread.php?t=241037

      Paint Jail Experience

      https://sites.google.com/site/paintjail/home


    6. #6
      Join Date
      Feb 2010
      Location
      NE Arkansas
      Posts
      616
      Quote Originally Posted by Ssoroka9869 View Post
      I’ll take the kick panels
      The easiest (and cheapest) way to get them is through me on eBay. The overall shipped price will be lower with eBays shipping program buying them directly from me and shipping them usps.

      https://www.ebay.ca/itm/1967-1969-Ca...VXIfkl&vxp=mtr
      My build thread

      http://www.nastyz28.com/forum/showthread.php?t=241037

      Paint Jail Experience

      https://sites.google.com/site/paintjail/home

    7. #7
      Join Date
      Feb 2010
      Location
      NE Arkansas
      Posts
      616
      Ttt
      My build thread

      http://www.nastyz28.com/forum/showthread.php?t=241037

      Paint Jail Experience

      https://sites.google.com/site/paintjail/home

    8. #8
      Join Date
      Feb 2010
      Location
      NE Arkansas
      Posts
      616
      I have a couple sets of each for sale right now

      Trays $189 + shipping each

      Kickpanels $150 + shipping a set
      My build thread

      http://www.nastyz28.com/forum/showthread.php?t=241037

      Paint Jail Experience

      https://sites.google.com/site/paintjail/home

    9. #9
      Join Date
      Jul 2012
      Posts
      2
      Country Flag: United States
      I'm trying to get hold of the gentleman making these super cool kick panels and deck trays ... can he email me at [email protected] or call me at 361.510.5530

    10. #10
      Join Date
      Feb 2010
      Location
      NE Arkansas
      Posts
      616
      I don't have any right now (other than the one on eBay). I'll try and start making some more in a few weeks as long as the weather coooperates with me. Right now it's storming and the temps hadn't been quite warm enough. The best time is late spring, being cold in the morning and above 60 for an hour at 3:00 - 4:00 isn't good enough.

      But I will post here as i get them made....not planning on making a huge bunch of them like I used to, but you and the couple that PM'ed me are next in line.

      Dennis
      My build thread

      http://www.nastyz28.com/forum/showthread.php?t=241037

      Paint Jail Experience

      https://sites.google.com/site/paintjail/home

    11. #11
      Join Date
      Apr 2010
      Location
      Prescott, Arizona
      Posts
      100
      Country Flag: United States
      [QUOTE=shroomopolis;1353778]I'm trying to get hold of the gentleman making these super cool kick panels and deck trays ... can he email me at [email protected] or call me at 361.510.5530[/QUOTE

      Sent you a email.

      John

    12. #12
      Join Date
      Jul 2007
      Location
      nw phx
      Posts
      178
      these are pretty sweet!
      ...life is too short, live for today, tomorrow isn't guaranteed

    13. #13
      Join Date
      Apr 2010
      Location
      Portland, OR
      Posts
      357
      Hi Dennis.

      I'm down for a first gen and second gen package tray! I'm ready this time
      1973 Firebird 466 Pontiac, T56, C5 Brakes, PTFB and Hotchkis suspension
      2011 Camaro SS Supercharged, ZL1 body and brakes, Z28 suspension.

    14. #14
      Join Date
      Dec 2020
      Posts
      157
      Do anything for a 71 Chevelle?

    15. #15
      Join Date
      Feb 2010
      Location
      NE Arkansas
      Posts
      616
      Quote Originally Posted by FORDvsCHEVY View Post
      Do anything for a 71 Chevelle?
      Sorry I don't

      - - - Updated - - -

      Quote Originally Posted by 70Uglybird View Post
      Hi Dennis.

      I'm down for a first gen and second gen package tray! I'm ready this time
      I have one first gen tray ready to ship right now...can work on the 2nd gen and have it ready by the weekend

      - - - Updated - - -

      One first gen tray available to ship right now
      My build thread

      http://www.nastyz28.com/forum/showthread.php?t=241037

      Paint Jail Experience

      https://sites.google.com/site/paintjail/home

    16. #16
      Join Date
      Feb 2010
      Location
      NE Arkansas
      Posts
      616
      One 67-69 Tray available right now
      My build thread

      http://www.nastyz28.com/forum/showthread.php?t=241037

      Paint Jail Experience

      https://sites.google.com/site/paintjail/home

    17. #17
      Join Date
      Mar 2008
      Location
      Los Angeles
      Posts
      43
      Any chance these would or could be made to fit G-Body?
      1987 El Camino SS
      Displacement=357 CID 10-1
      Intake=Lingenfelter SR w/30 lb 52mm TB
      Heads=AFR 195 Street Eliminators
      Cam=Lingenfelter 219/219 .560/.560 112 LC
      Headers=Doug Thorley Tri-y 15/8", 2-1/2 exhaust
      Computer=1227730 NVSRAM S_AUJP_V4 Bin
      Trans=700-R4
      Rear End=GN 8.5 Posi 342
      Brakes= C-5

    18. #18
      Join Date
      Jun 2016
      Posts
      43
      Quote Originally Posted by 1976CamaroGuy View Post
      I don't have any right now (other than the one on eBay). I'll try and start making some more in a few weeks as long as the weather coooperates with me. Right now it's storming and the temps hadn't been quite warm enough. The best time is late spring, being cold in the morning and above 60 for an hour at 3:00 - 4:00 isn't good enough.

      But I will post here as i get them made....not planning on making a huge bunch of them like I used to, but you and the couple that PM'ed me are next in line.

      Dennis
      Hey Dennis - What’s the EBay link?





    Advertise on Pro-Touring.com