Results 21 to 26 of 26
-
05-09-2019 #21
Registered User
- Join Date
- Sep 2016
- Location
- Bakersfield, CA
- Posts
- 603
I went to align them properly last night and noticed that for some reason, my low beam/hi beam is reversed where my dash light is concerned. In other words, when my low beams are on, the hi beam indicator on my dash is lit. When I switch to hi beams, the hi beam indicator goes off.
I'm thinking this is the wiring of the adapter that comes with the Nokya conversion housings. Any idea how to test/verify this and correct it?
EDIT: I think I found the answer: https://www.youtube.com/watch?v=hEkqssfg4Fk
Only difference is that my male 3 prong plug has red on one side, then black in the middle, and a white opposite the red. So which 2 do I switch?http://www.TheFOAT.com/92GTA
1969 Pontiac Firebird w/535ci IAII aluminum block, Dailey dry sump, Holley EFI (full road race build). Primer black w/black interior.
1992 Pontiac Trans Am GTA w/SLP Performance Package. Dark Jade Grey Metallic, grey leather, T-Tops.
-
05-09-2019 #22
Registered User
- Join Date
- Sep 2016
- Location
- Bakersfield, CA
- Posts
- 603
I swapped the red and white. Working just how it should now.
http://www.TheFOAT.com/92GTA
1969 Pontiac Firebird w/535ci IAII aluminum block, Dailey dry sump, Holley EFI (full road race build). Primer black w/black interior.
1992 Pontiac Trans Am GTA w/SLP Performance Package. Dark Jade Grey Metallic, grey leather, T-Tops.
-
05-09-2019 #23
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 15,975
So, you got 2 housing kits and 4 bulbs? I've been vaguely following all this.
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @projectgattago
Dr. EFI
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
-
05-09-2019 #24
Registered User
- Join Date
- Sep 2016
- Location
- Bakersfield, CA
- Posts
- 603
No, just 2. I only run the outboard hi/low beam lamps, not the inboard. I'm using the inboard lamp locations for ducting.
These things are so badass all but the latest cars off the showroom floor on the road look like they are driving by candlelight lol! I got them aimed correctly and the cut-off is perfect for other drivers to not be blinded.http://www.TheFOAT.com/92GTA
1969 Pontiac Firebird w/535ci IAII aluminum block, Dailey dry sump, Holley EFI (full road race build). Primer black w/black interior.
1992 Pontiac Trans Am GTA w/SLP Performance Package. Dark Jade Grey Metallic, grey leather, T-Tops.
-
05-09-2019 #25
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 15,975
So what would be needed for the typical 4 light setup?
1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @projectgattago
Dr. EFI
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
-
05-09-2019 #26
Registered User
- Join Date
- Sep 2016
- Location
- Bakersfield, CA
- Posts
- 603
2 housing kits and 2 bulb kits.
The LEDs can do hi/low so your inboards just would never go to high beam due to the factory wiring but all will work just fine.
http://www.TheFOAT.com/92GTA
1969 Pontiac Firebird w/535ci IAII aluminum block, Dailey dry sump, Holley EFI (full road race build). Primer black w/black interior.
1992 Pontiac Trans Am GTA w/SLP Performance Package. Dark Jade Grey Metallic, grey leather, T-Tops.
-
Reply With Quote
