Results 1 to 3 of 3
Thread: Caliper to wheel clearance
-
04-28-2019 #1
Registered User
- Join Date
- Oct 2015
- Posts
- 51
Caliper to wheel clearance
I'm running c6 z06 brakes with kore 3 hubs and brackets. The spokes to my wheels wouldn't clear the calipers. Even with a 3/16 spacer, I have 1.5mm of clearance at the tightest spot. What is the minimum clearance needed for these brakes? The wheels are cheap ridler 650s that I'm trying to make work until I can get something custom made.
-
04-28-2019 #2
Registered User
- Join Date
- Apr 2012
- Location
- Woodstock, IL
- Posts
- 2,410
My comfort level is 1/8" or more.
You could probably get away with 1.5mm or 1/16".
Do you have room on the studs to go with a 1/4" spacer though?
-DaleSchwartzPerformance
The leader in bolt-in muscle car chassis
SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram
Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more
04-28-2019 #3
Registered User
- Join Date
- Oct 2015
- Posts
- 51
Not without going to longer studs, which I'll probably do to be on the safe side.
Originally Posted by Schwartz Performance
Reply With Quote
