Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 2 of 2
    1. #1
      Join Date
      Jul 2017
      Location
      Highland, IL
      Posts
      22
      Country Flag: United States

      Floater for 3.5" axle tubes

      Does anyone know of a full floater setup for 3.5" axle tubes? It's a long story, but I "accidentally" ended up with a 9" housing from Moser that has the 3.5" tubes. Didn't realize that it was an oddball size until it was too late (already welded up with brackets). I wanted to go with Wilwood's new SX6 brakes, but I haven't been able to find a kit that has the floater housing ends that would fit these tubes.



      TIA

      Mike
      Mike
      69 Javelin
      6.0 LS
      Tremec T-56
      DSE X-Gen & Quadralink


    2. #2
      Join Date
      Apr 2012
      Location
      Woodstock, IL
      Posts
      2,410
      Country Flag: United States
      You'll probably find a drag race style floater with that big of a tube, but i'd give a call to whoever has a SX6 kit for a floater, and see if they could machine some different ends up.
      SchwartzPerformance
      The leader in bolt-in muscle car chassis
      SchwartzPerformance.com | GMachineChassis.com | Facebook | Twitter | Instagram

      Dealer for: Forgeline, RideTech, Tremec, American Powertrain, Silver Sport Transmissions, GM Performance Parts, RECARO, Cerullo Seats, TMI Products, Vintage Air, Baer Brakes, Wilwood, BeCool, AFCO, Tanks Inc, Holley / Hooker, Ultimate Headers, Rick's Tanks, Moser Engineering, Currie, TechAFX, Stainless Works, II Much Fabrication, and many more



    Advertise on Pro-Touring.com