Results 1 to 3 of 3
-
03-26-2019 #1
Registered User
- Join Date
- Dec 2018
- Posts
- 12
wiring due master cylinder low level sensor in a 68 camaro
Hello to all that can help , Just installed new dse master cylinder/booster that has the low level sensor in the reservoir. Need to pick up pigtail/connector ,I see that there are to wires to this connector would you wire the old wire from the junction block switch to one wire and eliminate the other wire? Cannotfind schematic on this sensor ,the power brake master cylinder is C6 corvette thank you for your help
Last edited by mtalp50; 03-26-2019 at 02:47 PM. Reason: spelling error
-
03-27-2019 #2
Registered User
- Join Date
- Apr 2010
- Location
- Jersey Shore
- Posts
- 695
I dont know for sure, but I would guess you have to ground one of the wires, and the other gets connected to the old junction block switch wire
-Chris
'69 Corvette
'55 Chevy Hardtop
AutoWorks Middletown, NJ
@autoworksnj for corvette and shop car pics
https://www.pro-touring.com/showthre...e-Build-Thread
-
03-27-2019 #3
Registered User
- Join Date
- Mar 2004
- Location
- Mid-Michigan
- Posts
- 2,764
Detroit Speed should be able to give you this info... [email protected] or 704.662.3272
It Should be in the instructions but it isn't... Tell them that when you talk to them.
Mark:
"Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
This my Bad Ast thread...
https://www.pro-touring.com/showthre...roject-Faze-II
This is my Fotki album...
http://astroracer.fotki.com/
-
Reply With Quote
