1969 -68-67 camaro Ls swap custom cold air intakes

[frankv11]

Just want to say thanks Frank finally got mine installed and it fit like a glove.Attachment 200473Attachment 200474Attachment 200475Attachment 200476

Wow john what an amazing build , do you have built thread ? And thank you for posting this up . Love to see some end user pictures .

[frankv11]

Frank. Do you have any customer pictures of one modified to fit an LSA.

Sure do , this is what other customers have done for LSA . A few cuts to accommodate and one weld at circled area

[AEH]

Thank you Frank. Is it Better to start with the LS kit? Or is the LT5 a closer fit?

[frankv11]

Thank you Frank. Is it Better to start with the LS kit? Or is the LT5 a closer fit?

It’s best to start with LS kit , gives you more room to cut and experiment

[frankv11]

Had a hard time sourcing sone of the components but the 1st gen camaro LS swap Cold Air Intakes are back on the menu . Ready to ship

“ Best LS , LT4 or Lt5 Swap Cold Air Intakes on the market” $850 + shipping.
For any one running an LT4,LT5 ,LS , MAF or no MAF on your 1967 1968 1969 camaro / firebird . This is an all included real coldairintake offered in black anodized aluminum or “ Now coming soon in FULL CARBON FIBER (LS type only ) “. kit comes with everything needed to install.

Perfect for 99% of LS swap radiators, clears most oil coolers on drivers side Radiator tank.

Works perfect with magnasuperchanger , fast , Holley sniper and most low to medium raised intakes . “Please specify if using supercharger as this kit uses different length tube. “

Accommodates a large variety of setback motor mounts , super chargers , subframe variations , after market intakes ( Holley , precision etc.. )


Kit includes everything needed for install.
1 . 4” black anodized tube or Carbon fiber
2. Two 4” silicone coupling
3. Four T bolt clamps
4. Four mounting tabs ( need to bent to your spec )
5, Alloy or Carbon fiber driver and passenger heat shields
6. All necessary hardware
7 . GM throttle body sleeve adapter kit
8. K&N Ru-3101HBK oil free Filter


#grayareasteelcompany #supercharger #firstgencamaros #1969camaro #1967camaro #1968camaro #firebird #lscoldairintake #customintakes #LSintake #KNfilter #lsswap #airfilter #realcoldairintake #massairflow #69camaro #customecoldairintake #airintake #wipplesupercharger.................... #handmadeintheUSA #detroitspeed #Americanmuscle #chevroletperfomance #protouring. #customintake #holleyfest
#lt4camarointake #lt4 #lt4coldairintake #GAS_co .

[slammed68]

Frank,

Is it possible to buy just the headshield panels?

[frankv11]

Frank,

Is it possible to buy just the headshield panels?

Sorry but no . I’ve done it before and it creates a mess for me with broken kits .

[slammed68]

Sorry but no . I’ve done it before and it creates a mess for me with broken kits .

No worries, totally understand.

[frankv11]

Now taking deposits on the First Gen Camaro Carbon Fiber Cold Air Intakes.

$200 deposit secures you a unit at $1000 plus shipping . units will be available for shipping in approximately 6 weeks

This is Promotional 2 week pricing only. final pricing to be determined once all my associated costs are finalized. $1100-$1250 range trying to keep them as cheap as possible.

Preferably, Please follow and DM / contact via Instagram @1969camaroskunkworks as it’s easier to track and exchange pictures videos details etc..

[redbull396]

That is bad ass! Lot of coin for a cold air, but a bullet I just might have to bite! Are both CF closeout panels included in that promotional price or are they alum? Thanks!

[frankv11]

That is bad ass! Lot of coin for a cold air, but a bullet I just might have to bite! Are both CF closeout panels included in that promotional price or are they alum? Thanks!

Both heat shields are 100% carbon fiber too just like tube . Complete kit everything you’ll need for install , you’ll just have to cut length of tube ( to your specs ) going to TB .


“Not the cheapest but the BEST IN THE MARKET. “



Kit includes everything needed for install.
1 . 4” Carbon Fiber Tube - Matte finish
2. Two 4” silicone coupling
3. Four T bolt clamps
4. Four mounting tabs
5, two Carbon fiber driver and passenger heat shields
6. All necessary hardware
7 . GM throttle body sleeve adapter kit
8. K&N Ru-3101HBK oil free Filter

[68RS350]

Hey I sent you a PM about ordering the closeouts without any holes for a 69 Camaro.

[frankv11]

Hey I sent you a PM about ordering the closeouts without any holes for a 69 Camaro.

Hi , I believed I responded but I’m not parting out units , it creates a mess of partials on my end sorry . Thanks you fir your interest .

[TANKMASTERJ]

Frank your intake , closeouts and vents were all a hit at LS Fest East. Everyone pointed to the hood vents and a lot of OHMYGOD check out those !

[frankv11]

FREE / GIVEAWAY ALERT . Please follow us on Instagram @1969camaroskunkworks for full details . Will be posting DRAWING this up coming week .

[frankv11]

Will be posting GIVEAWAY tomorrow on IG

[markaaron80]

So what is the price on the carbon version now?

Thanks, Mark

[frankv11]

So what is the price on the carbon version now?

Thanks, Mark

Hi mark those are $1100 plus shipping

[frankv11]

https://grayareasteel.com/products/c...er-cold-intake “


Best LS Swap CARBON FIBER Cold Air Intakes on the market” $1100+ shipping.
For any one running an LS , MAF or no MAF on your 1967 1968 1969 camaro / firebird . Now offered in FULL CARBON FIBER. kit comes with everything needed to install.

Perfect for 99% of LS swap radiators, clears most oil coolers on drivers side Radiator tank.

Works perfect with fast , Holley sniper and most low to medium raised intakes . “Please specify if using a top mount power steering pump reservoir ( close to TB ) as this kit uses different offset on MAF boss.

Accommodates a large variety of setback motor mounts , subframe variations , after market intakes ( Holley , precision etc.. )

“ Don’t forget to check us out at GrayAreaSteel.com link in bio “


Kit includes everything needed for install.
1 . 4” Carbon Fiber Tube - Matte finish
2. Two 4” silicone coupling
3. Four T bolt clamps
4. Four mounting tabs
5, two Carbon fiber driver and passenger heat shields
6. All necessary hardware
7 . GM throttle body sleeve adapter kit
8. K&N Ru-3101HBK oil free Filter


#grayareasteelcompany #carbonfiber #lsswap #customcoldairintake
#customcoldairintakes #carbonfiberintaketube
#customcarbonfibertube #firstgencamaros #1969camaro #1967camaro #1968camaro #lscoldairintake #customintakes #LSintake #lsswap ..

[markaaron80]

Hi Frank. Is the carbon fiber version the only one that offers the moved MAF boss? Want to order something, just curious if the Carbon fiber is the option that will work the best, or if aluminum will work as well.