Jason's 67 pro touring Camaro

[wareaglescott]

That exhaust looks awesome. Cant wait to hear it!!

[TANKMASTERJ]

Thanks for all the kind words guys.
Here a few more exhaust pics.

[TANKMASTERJ]

Progress has been slow. Waiting on forgeline barrels as I had to re barrell the wheels. ZX3Rs bought from a beamer. They were 18X10 front and back with 6.5 backspace. However I needed a front backspace of 7" and a rear of 3.5. I knew this upon purchase but I thought it was a deal. Turns out I'm spending almost as much. Maybe saved a grand but that's still a savings.
Got my Hertz speakers under the package tray last night.
Also Wegner Motorsports sent me a picture yesterday of my custom valve covers. They shipped yesterday headed way. As soon as they arrive I get to do a first start up.

[Tynitty]

Wow! The exhaust looks so good, honestly the entire underside of the car is immaculate!

[thumper877]

Wow those valve covers turned out nice. They should for how much they are lol. But what on these cars isnt $1000 Should really look awesome on the car

[TANKMASTERJ]

Thanks as you know it's a lot of effort!

[Senek67RS]

Progress has been slow. Waiting on forgeline barrels as I had to re barrell the wheels. ZX3Rs bought from a beamer. They were 18X10 front and back with 6.5 backspace. However I needed a front backspace of 7" and a rear of 3.5. I knew this upon purchase but I thought it was a deal. Turns out I'm spending almost as much. Maybe saved a grand but that's still a savings.
Got my Hertz speakers under the package tray last night.
Also Wegner Motorsports sent me a picture yesterday of my custom valve covers. They shipped yesterday headed way. As soon as they arrive I get to do a first start up.

Looks like we were both waiting on our valve covers from Wegner Mine arrived on Saturday.

[TANKMASTERJ]

Here some photos of the Wegner Motorsports Valve cover

Also a couple pics of the coolant pipes. Upper is 1.25 diameter and lower is 1.5" with a 3/8" bungs for water temp sender.
I've got se run videos as soon as I figure out how to post.

[mistral]

Great looking car, great build!

[TANKMASTERJ]

Great looking car, great build!

Thanks for kind words. I'm looking to drive to a car show father's day so I'm pushing hard. I may or may not make it but LS Fest East is next on my list 2022!
and don't worry the PTF community will keep Nina Straight upon your death ��

[cam1968327]

Here some photos of the Wegner Motorsports Valve cover

Also a couple pics of the coolant pipes. Upper is 1.25 diameter and lower is 1.5" with a 3/8" bungs for water temp sender.
I've got se run videos as soon as I figure out how to post.

Those valve covers are the bomb!

[TANKMASTERJ]

Yes they are killer. The accessories drive also.
Hats off to Wegner Automotive guys and specifically Ben in Engineering who helped get the design I wanted.
Those guys make great stuff. And unlike holley accessories drive this was made in USA. I'm not knocking holley, I know there drives and valve covers are nice stuff. I just like to buy USA when I can.

[TANKMASTERJ]

Ok so my Nuke Performance Catch cans are here.
One is mounted but not plumbed. For those of you looking for one, Nukes is hands down the nicest machined catch can I've ever laid yes on. Has two inputs and one out put. Can be plumbed outlet to atmosphere or recirculating.
Also a drain on the bottom. Can was 316.00 bucks plus a 27.00 drain valve and hose. Worth every single penny.

[TANKMASTERJ]

They have a carbon fiber can, a performance can and a competition can. Get the competition, it's got better filtration and you can loosen the base from the top hat and rotate the can 360 for making fittings connect where you want them. Also has a bullet dipstick.

[chevyz240]

They have a carbon fiber can, a performance can and a competition can. Get the competition, it's got better filtration and you can loosen the base from the top hat and rotate the can 360 for making fittings connect where you want them. Also has a bullet dipstick.

Nice to see some Swedish parts!

[TANKMASTERJ]

Nice to see some Swedish parts!

And now she is plumbed

[mistral]

That is so nice!

[TANKMASTERJ]

Thanks!

[TANKMASTERJ]

Ok so I narrowed my back seat bottom and top for the tubs. I then fit the anvil carbon fiber mirrors then epoxied the appropriate parts of them and reassembled them .
Put them on the car for a photo and now I got to make a gasket where they mount to the car.

[TANKMASTERJ]

Incant find your build thread where is it?