FS: Heidts Spindles - Wilwood Hubs - GM short steering arms 67-69 camaro

[jorgezee1]

Hello all,

Cleaning out my garage and getting rid of some parts I will not be using for my build.

Most parts are for a 1st gen F-body unless otherwise noted.


2” drop Heidts Spindles - 180 obo (part # SP-110) - SOLD
https://www.heidts.com/part/2-drop-spindle-sp-110/

Willwood Hubs 1/2” screw in wheel studs - 180 obo ( Part # 270-7037) - SOLD
https://www.wilwood.com/Hubs/HubProd?itemno=270-7037

GM - Short Steering Arms - 200 obo (Part # SHORT LH-3902519 RH-3902520 turn stop pad is more pronounced on top, arm appears a bit thinner than later arms. 1968)
http://www.pozziracing.com/camaro_st...part%20numbers


The parts are In good condition, maybe about 2-3000 miles on the Spindles and hubs.

Thanks,
Jorge

[cam1968327]

Are the wilwood spindles a stock replacement with the exception of 1/2” studs.

[jorgezee1]

Are the wilwood spindles a stock replacement with the exception of 1/2” studs.

I’m not sure, I bought these from someone else that had a Wilwood kit on for brakes. The part number for the hub is 270-7037

[cam1968327]

I’m not sure, I bought these from someone else that had a Wilwood kit on for brakes. The part number for the hub is 270-7037

Thanks! I will check it out.

[markaaron80]

I’m not sure, I bought these from someone else that had a Wilwood kit on for brakes. The part number for the hub is 270-7037

I would think so. I have a Heidts front subframe with their 2 inch drop spindles. Heidts said they are based on a factory disc front spindle. My wilwood front brakes will fit factory 69 camaro front disc spindle as well as heidts 2 inch drop spindles.

Hope this helps.

[jps68]

Sent you a PM ...

[jorgezee1]

All PM's have been replied to:

Spindles Pending Sale

Hubs Pending Sale

[jorgezee1]

Spindles and Hubs are sold and shipped.

THANKS!

[jps68]

Spindles and Hubs are sold and shipped.



THANKS!

Thanks for the hubs Jorge! And the very quick shipping!