Results 1 to 4 of 4
Thread: Shifter boot base install
-
02-03-2019 #1
Registered User
- Join Date
- Mar 2018
- Posts
- 68
Shifter boot base install
I got a duhhhhhhhh question. Just want to make sure I get it right. Just laid down a bunch of dynamat, about to get ready to install the carpet.
Installing the shifter boot base (far left in pic).... should I use some metal screws and/or adhesive (on top of the dynamat) to secure the base ?
-
02-03-2019 #2
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 15,975
You can use metal screws, or if you want to get fancy, use nutserts.
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @projectgattago
Dr. EFI
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
-
02-03-2019 #3
Registered User
- Join Date
- Aug 2004
- Location
- NJ
- Posts
- 1,293
Where did you get that setup from?
-
02-03-2019 #4
Registered User
- Join Date
- Mar 2018
- Posts
- 68
Thanks!
I got it from Silver sport transmission. It came with their kit for a manual conversion in a 1970 Nova
-
Reply With Quote
