Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 20 of 273

    Threaded View

    1. #11
      Join Date
      Feb 2019
      Posts
      218
      A little further on the notch. I got the top plates tacked in, and the cross braces tacked in. Im not sure how to brace this. Im going to look at some pictures online. I made some gussets for the corners, but Im not sure if they are enough. I have more of the square bars so I could make corner braces out of them. I can get more of the bar and triangulate the top bars. I can get round bar, and do something with it. Im just not sure. Tell me what you think.

      Next, Ill remove this as an assembly, and cut the top of the frame only. Then Ill re-install it, square it, and weld it. Then I can cut up from the bottom and meet the top cut, and the notched piece will be out. Then I can cap the bottom.




      Attached Images Attached Images    






    Advertise on Pro-Touring.com