Results 181 to 200 of 273
Thread: 1967 Dodge D-100 (Isaacs truck)
-
06-05-2021 #181Registered User
- Join Date
- Feb 2019
- Posts
- 218
A little further on the notch. I got the top plates tacked in, and the cross braces tacked in. Im not sure how to brace this. Im going to look at some pictures online. I made some gussets for the corners, but Im not sure if they are enough. I have more of the square bars so I could make corner braces out of them. I can get more of the bar and triangulate the top bars. I can get round bar, and do something with it. Im just not sure. Tell me what you think.
Next, Ill remove this as an assembly, and cut the top of the frame only. Then Ill re-install it, square it, and weld it. Then I can cut up from the bottom and meet the top cut, and the notched piece will be out. Then I can cap the bottom.
Picture folder for Isaacs truck
https://drive.google.com/drive/folde...aN?usp=sharing
Isaacs truck build thread:
https://www.pro-touring.com/threads/...(Isaacs-truck)
-
06-05-2021 #182Registered User
- Join Date
- Sep 2013
- Location
- sw Kansas
- Posts
- 1,650