GP Race Works 69 Camaro LT4 w/8 speed Build

[jlcustomz]

#1 or 2, prefer 2.

[Schwartz Performance]

I like number 1.

[TallTex]

We are doing our builds at about the same pace. I dealt with the male spline yoke issue last week. Thought I was never going to find it but finally did. Chevy dealers couldn't even help. But a custom drive line specialist did finally

[GPRaceWorks]

We are doing our builds at about the same pace. I dealt with the male spline yoke issue last week. Thought I was never going to find it but finally did. Chevy dealers couldn't even help. But a custom drive line specialist did finally

Did you use the 1350 x 1410 solution?

[TallTex]

I used theAAM 40137666. It is a 1415. 1350, 1410 and 1415 are all designed for 3/4 pick ups.

- - - Updated - - -

The 1415 is just a tad bit mor narrow

[1sikride]

Two

[RS Performance]

Looking good GP!! How about....Roadrage!!?! ...o wait #2 is killer!!

[GPRaceWorks]

Looking good GP!! How about....Roadrage!!?! ...o wait #2 is killer!!

Thanks! I think I'm going to go with both 1 & 2

2 is my favorite also! Roadrage....I'm working on it personally.. hahahaha. Will you guys be at the Good Guys show in NC in 2020?

[GPRaceWorks]

SOLD!!!

Hay Guys, didn't need the Sonnax Chromoly, 32-Spline, Spicer 1350 Joint Style slip yoke. If interested let me know. $75 (free shipping lower 48 states). Retail at Summit is $142. It is New and never been used. Overall length 7 7/8. Spline lingth inside 5 7/8

[GPRaceWorks]

So I got the LSX Concepts LT4 fittings today. They look and fit great. One has a fill cap and the other is just a 90°. You can use them on either port. They are expensive however, $145 for the set.

[Motown 454]

Nice pieces, slick idea to make them interchangeable.

[GPRaceWorks]

So I'm planning out the dash and I know lots of guys are using RacePack. I'm looking at the AEM CD-7. I like the color display better than the RacePack. Has anyone used the CD-7?

[JustinFBird]

You should also lookin into aim Motorsport. They have a great display, They are around the same price.

[GPRaceWorks]

You should also lookin into aim Motorsport. They have a great display, They are around the same price.

Those look nice also. Will look into it.

[GPRaceWorks]

Ordered the stainless steel fuel tank from Rick's Tanks. It is specifically designed to fit with the SPEC chassis and 3" exhaust. It will have the ZL1 pump.

This picture may not be the exact one, but pictures make posts better!!

[John McIntire]

I hope you talk to Carl at vaporworx for a way to control that pump.

I just received his controller last week and it is a complete kit with everything you will need to power up that pump and make sure it lives.

He's a member/moderator here and has a wealth of knowledge on the subject.

vaporworx.com

[Schwartz Performance]

I hope you talk to Carl at vaporworx for a way to control that pump.

I just received his controller last week and it is a complete kit with everything you will need to power up that pump and make sure it lives.

He's a member/moderator here and has a wealth of knowledge on the subject.

vaporworx.com

LT4 controller kits come with a fuel pump driver so Carl's controller isn't required on this application.
Rick's installs the Vaporworx corner pickups and such inside the tank, too.

GP can confirm, sorry to bust in. lol

-Dale

[GPRaceWorks]

LT4 controller kits come with a fuel pump driver so Carl's controller isn't required on this application.
Rick's installs the vaporworx corner pickups and such inside the tank, too.

GP can confirm, sorry to bust in. lol

-Dale

That is correct. No need for the controller. The LT4 controller and secondary pump take care of it all.

[GPRaceWorks]

Got the driveshaft installation done. Nice quality.

[Schwartz Performance]

Got the driveshaft installation done. Nice quality.

I don’t recall seeing a boot like that anywhere in the 8L90 packages.. did that come from GM or somewhere else?