Results 41 to 42 of 42
Thread: 1951 Ford F1 Build
-
07-25-2020 #41Registered User
- Join Date
- Jan 2019
- Posts
- 26
-
07-25-2020 #42Registered User
- Join Date
- Jan 2019
- Posts
- 26
4 link
Progress on the 4 link...
This is the finalized design of the 4 link. The upper arms 25.2" long and are 48 degrees included angle and angled 3.5 degrees down in the front. the lower arms are 36" parallel and angled 2 degrees up in the front.
The rod is 1.25 OD .188 wall DOM which i felt was too thin to tap directly into so i made these weld in threaded ends
this is how they will get welded in place. a big V groove to ensure they weld goes all the way through the joint and a couple spot welds.
The links are ready to be coped and welded with the other bushing housings and the brackets are ready to be welded up
-
Tags for this Thread