Results 1 to 1 of 1
  1. #1
    Join Date
    Nov 2018
    Location
    Winchester, KY
    Posts
    27
    Country Flag: United States

    Default 68 rag camaro wrapped around an 04 GTO/LS1 man

    Had started a 68 camaro vert transformation in another section (https://www.pro-touring.com/threads/129956-68-rag-camaro-wrapped-around-an-04-GTO-LS1-man) but am continuing here..



    Depending where you decide to cut into original dash can determine what you can save sparing the extra bridging and water run offs. On the top surface of original dash I cut out all the well(you have to)and stopped at the inside vertical seams, maintaining strength on each side where the outer and inner cowl join. The GTO dash was then measured width wise had to add to the drip edges of it in order for water to extend outward/sides into the gutter. Second and third photos show underneath created two pieces each side(guess if you have better jigs and skills just one).
    Attached Images Attached Images      


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •