Parts needed for T56 in 67 Camaro...

[redbull396]

So I picked up a low mile GTO mn12, that came with new Excedy twin disk clutch, gm throwout, gm ls bell housing, and pressure plate. This will be going on a ls2 or 3, havent decided that yet, but I don't think it matters.
The trans did not come with a harness, yoak, or, shifter. What all else do I need? I've searched and searched, but can't find a very cut and dry answer.

I know I will need a crossmember, hydraulic master, and mounting, pedal system...anything else I am missing (apart from above pieces)? Is there a one stop shop to order everything?



Please help with some advice on parts or a vendor that can get me the stuff I need. Thanks!

[andrewb70]

I am pretty sure the GTO trans can use the F-body shifter. Bowler has mounts for the MC. Holley makes LS swap components including the transmission crossmember (highly recommend you use the engine mounts, pan, headers, all of it together). Slip yoke is the same as F-body T56...27 spline...same as Powerglide. Various vendors make nice billet yokes (Strange has a nice one).

Andrew

[redbull396]

I am pretty sure the GTO trans can use the F-body shifter. Bowler has mounts for the MC. Holley makes LS swap components including the transmission crossmember (highly recommend you use the engine mounts, pan, headers, all of it together). Slip yoke is the same as F-body T56...27 spline...same as Powerglide. Various vendors make nice billet yokes (Strange has a nice one).

Andrew

Thanks for the info. Was looking at all the Holley stuff. I am running a rack steering, so I've found the Holley pan won't work, was suggested autokraft (or Speedtech) and dirty dingo sliders to make that work with stock subframe. I think the rest from Holley will work tho. I wonder if the adjustability with the dingo sliders will get me the angle i need with using the holley trans mount?

[Craig@Bowler]

So I picked up a low mile GTO mn12, that came with new Excedy twin disk clutch, gm throwout, gm ls bell housing, and pressure plate. This will be going on a ls2 or 3, havent decided that yet, but I don't think it matters.
The trans did not come with a harness, yoak, or, shifter. What all else do I need? I've searched and searched, but can't find a very cut and dry answer.

I know I will need a crossmember, hydraulic master, and mounting, pedal system...anything else I am missing (apart from above pieces)? Is there a one stop shop to order everything?

Please help with some advice on parts or a vendor that can get me the stuff I need. Thanks!

We can get you everything but the shifter. If your looking for a good replacement shifter mechanism I would check out the MGW shifters. Shoot me an email [email protected] if you want to get an estimate on everything. Thanks!