1969 Camaro Project shell. DSE Everything. Frame, quaralink, connectors and more.

[classiccarcustoms]

I just want to make sure this is at the top, this is a shell. If you p.m. me and ask if the glass is there or what engine and transmission it has, I will know you didn't read the ad.

The soonest I will have current pictures of the wheel will be this weekend. I will post them as soon as I have them.
Also started on the smooth firewalll
Car is now on the rotisserie and DSE subframe connectors are fully installed and welded in. DSE mini tubs are installed. I also purchased a stock back seat to go with the car.
DSE Quadralink installed.

Included and will be installed:

DSE Hydroformed subframe part # 032004-s (no brakes) Complete powder coated & assembled from DSE
DSE subframe connectors part # 010101
DSE Mini tubs part # 040401
DSE Quadralink part # 041703-s
Moser narrowed fab 9" (54.75" axle flange to axle flange). No center section. New axles and bearings. Can be upgrade to floater.
New AMD driver side trunk drop off panel.
New AMD driver side outer wheel house.
New AMD rear deck lid.
Billet Specialties Black billet trunk hinges.
Dynocorn smooth firewall panel.
Raised trans túnel for t56 or 6L80.



I have a 1969 Chevrolet Camaro. It was media blasted and sealed seven years ago. It is a complete shell with a clean California title in my name.
It comes with original doors original front fenders (fenders need work) , rear deck lid, radiator support, header panel, factory cowl hood. Inner fenders.
All have also been blasted and sealed.

It has no interior, no drivetrain. No frame, no suspension. No glass.
I was going to go all new anyway.

It does have small rust in passenger side lower quarter, i have installed new trunk drop off extensions and new driver side outer wheel house (had a bad flat tire at one time) I have pictures before and after. Car is blasted, nothing to hide.
I just bought panels from AMD and they are included. I.E new rear deck lid, passenger rear quarter.


Everything listed above and installed is $30,500 Not looking to part out, so please don't text me and ask "if I change my mind, you will buy the DSE front clip. "
Location San Jose CA.
If you don't want the DSE front sub frame, I can take off $7,500. If you already have your own.

I can also deliver for a small fee. In CA.

Come on out, take a look, leave a cash deposit and I will have as a roller in 5 days. You will need to bring wheels, I don't have any rollers.

As of right now the firewall is test fit, trans tunnel is test fit, DSE frame connectors are fully welded in both sides, DSE mini tubs fully welded in. DSE Quadralink is fully welded in.
When I say fully welded in, not like most that is welded about an inch then seam sealed. Ours are welded all the way around, both sides.
I just have to finish firewall, transmission tunnel and bolt in rear end and powder coated sub frame.


***********************----------------------------------**************************************
NOT INCLUDED AND CAN ONLY BE PURCHASED IF YOU BUY THE CAR. NO I WILL NOT SELL THESE BEFORE OR AFTER THE CAR IS GONE. IF YOU BUY THE CAR, YOU ARE WELCOME TO BUY THESE PARTS, IF NOT, I WILL KEEP THEM.
I have
-DSE Fuel tank access panel.
-DSE core support closeout panel
-DSE mini tub trunk close out kit
-DSE quadra link tow hooks.
-Keyless push button start and keyless entry.
-Iditit Tilt column powder coated black.
-Nu relic power window kit.
-LLC shop fiber glass kick panel and rear package tray wrapped in black leather.
-Bear 14" pro 6 piston front and rear brakes.
-Fesler billet outer door handles.
-Ring Brother door strikers.
-Digital led tail lights.
-Forgeline wheels.

[Camarofreak67]

How much sir

[classiccarcustoms]

Price is listed in the thread.

[Dallaz]

Looking forward to the pics.

[classiccarcustoms]

Here are a couple before we took the car apart 7 years ago. Also a couple before we started the DSE parts.
I will get current pictures today.

[classiccarcustoms]

Happy New Year.
DSE Quadralink is fully installed.
I have had a bunch of question on selling just the shell with the quadralink.
So if you want just the shell with the DSE quadralink. $23,500
It will come with a stock subframe, powder coated with Global West upper and lower control arms, Billet QA1 shock, AGR close ratio gear box, new steering.

Pictures of the body coming today.

[classiccarcustoms]

Attachment 159836Attachment 159837Attachment 159838Pictures.
DSE trunk close outs and fuel access door will be installed this week. Price will go up.
Car is also getting scuffed and re sealed.

[classiccarcustoms]

Sale pending.

[blainemeyer]

Can I ask what firewall panel is that on the car ? Never mind I found that its from Dynacorn http://dynacorndepot.com/firewall-19...a-camaro-69-69.

[classiccarcustoms]

Good morning
Correct it is the Dynacorn firewall.

[classiccarcustoms]

Sold

[ryeguy2006a]

I really like that Firewall! I like that it give some dimension rather than the straight and flat panels. I'm sure it went to a good new owner.