Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Results 1 to 5 of 5
    1. #1
      Join Date
      Nov 2015
      Location
      The Netherlands Groenlo
      Posts
      2
      Country Flag: Netherlands

      68 Camaro Richmond 4+1 street speed question

      Hello,
      Can i use the richmond 4+1 street speed under my 68 camaro without
      any modification ?
      Which crossmember and transmission mouth i have to use?



      Here a link of the transmission

      https://www.summitracing.com/parts/rmg-7021710a

      Im planning not to use the middle console

      Any suggestion is welcome
      Thanks Maylon


    2. #2
      Join Date
      Aug 2004
      Location
      Ontario, Canada
      Posts
      2,313
      Country Flag: Canada
      I can't comment on how well it fits, but my research has found that a TH400 cross member will work.

      Ken
      If there is a hard way to do something, I'll find it!
      My other car is a Vega.

    3. #3
      Join Date
      Mar 2006
      Posts
      11
      Country Flag: United States
      I swapped on into a '69 Camaro and I used the TH350 crossmember and slid it back so that the front bolt hole in the crossmsmber lined up with the rear hole in the frame. Then drilled holes for the rear holes of the crossmember into the frame.

    4. #4
      Join Date
      Jul 2006
      Location
      Northwestern NJ
      Posts
      342
      May I ask why you want to use it? It's not an overdrive transmission...

      Tommy


      Tommy Souren

      "The older I get, the faster I was."

      Grandma's 20k mile '80 Malibu Classic, in-progress factory style LS6 454, Legend LGT 700 5 speed, 9" 3.70 posi, Global West suspension, 12"/11" discs.

    5. #5
      Join Date
      Nov 2015
      Location
      The Netherlands Groenlo
      Posts
      2
      Country Flag: Netherlands
      Quote Originally Posted by Kenova View Post
      I can't comment on how well it fits, but my research has found that a TH400 cross member will work.

      Ken
      Thank you Ken

      - - - Updated - - -

      Quote Originally Posted by 67427vette View Post
      I swapped on into a '69 Camaro and I used the TH350 crossmember and slid it back so that the front bolt hole in the crossmsmber lined up with the rear hole in the frame. Then drilled holes for the rear holes of the crossmember into the frame.
      Thank you

      - - - Updated - - -

      Quote Originally Posted by LS6 Tommy View Post
      May I ask why you want to use it? It's not an overdrive transmission...

      Tommy
      5th gear is 1:1 its by funny on the street and its not a daily driver
      Gear ratio is 2.23
      Maylon





    Advertise on Pro-Touring.com