Results 1 to 20 of 33
Thread: Project: KnightmareZ
-
12-12-2018 #1Registered User
- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
-
12-12-2018 #2Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
12-12-2018 #3Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
12-12-2018 #4Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
12-12-2018 #5Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
12-12-2018 #6Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
12-12-2018 #7Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
12-12-2018 #8Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
12-12-2018 #9Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
12-12-2018 #10Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
12-12-2018 #11Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
12-12-2018 #12Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
12-13-2018 #13Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
12-13-2018 #14Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
Decided to go with the ridetech coilover setup with the true turn and muscle bar.
12-13-2018 #15Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
Having to clearance the trunk pan so the ridetech 4 link cradle will fit. It wouldn't clear with either the stock trunk pan and frame rails or the new stuff.
12-13-2018 #16Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
Also wasn't crazy about the self tapping bolts into the frame rails for the cradle. (Not enough thread engagement IMO) Welded in spacers and will run a carriage head through the rails.
12-13-2018 #17Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
Also working on boxing in the frame rails
12-13-2018 #18Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
Close outs welded up and mini tubs going in
12-13-2018 #19Registered User- Join Date
- Nov 2018
- Location
- Winston Salem, NC
- Posts
- 94
12-21-2018 #20Registered User- Join Date
- May 2014
- Posts
- 52