Results 1 to 6 of 6
-
12-08-2018 #1
Press in ball joint replacement on GW UCAs
Hey guys, I have an email into Global West and would've called but cust support isnt open on weekends. Anyway, on my Cutlass I have the GW neg roll upper control arms and am curious if anyone has replaced the press in ball joints they have. There doesnt seem to be a lot of meat to get leverage in order to press them out. There isnt anything wrong with the ball joint I was curious if swapping to a tall ball joint would be feasible. Thanks!
'72 Cutlass - 370" LS2 topped w/a LSA blower
-
12-10-2018 #2
Welp, just got off the phone with GW and the ball joint has a weld in retaining ring and if it needs to be replaced for any reason they recommend sending it back to them and having them do it. Plus, even if I could get the ball joint out GW doesnt have a tall ball joint they can recommend for this UCA. GW uses a Moog k6157, which is actually a lower ball joint, if anyone was curious.
'72 Cutlass - 370" LS2 topped w/a LSA blower