Results 1 to 8 of 8
-
12-02-2018 #1
Registered User
- Join Date
- Jul 2016
- Posts
- 341
McLeod T/O bearing 69 camaro TKO 600
Hey guys, anyone running a McLeod hydraulic T/O bearing set-up ?? What kind of "play" in the pedal do you have ?? My pedal pretty much is close to the floor and it seems like I have a 1/2 inch of "play". Almost feels like I cant press the pedal anymore without hitting the floor and I'm still in gear. All of the air appears to be bleed out. Also the pedal is adjusted all the way up. Hmmm.
-
12-02-2018 #2
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 15,975
What size MC? What style of clutch?
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @projectgattago
Dr. EFI
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
-
12-02-2018 #3
Registered User
- Join Date
- Jul 2016
- Posts
- 341
Mcleod 1969 camaro hydraulic conversion kit. Not sure of the size of the master. McLeod clutch also.
-
12-02-2018 #4
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 15,975
Have you called their tech support?
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @projectgattago
Dr. EFI
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
-
12-02-2018 #5
Registered User
- Join Date
- Jul 2016
- Posts
- 341
Tomorrow I'll give them a call. Not to confident with Mcleod tech support to be honest. During my install of T/O bearing and clutch selection I received 5 different answers when I asked the same question to 5 diff techs.
-
12-02-2018 #6
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 15,975
I hate it when that happens. Did you make sure you have a proper airgap set?
Originally Posted by DT69Cam
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @projectgattago
Dr. EFI
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
-
12-02-2018 #7
Registered User
- Join Date
- Jul 2016
- Posts
- 341
Yes. I'm hoping I still have some air in the system even though it appeared I removed all the air when bleeding. I don't feel like removing trans again LOL. Thx Originally Posted by andrewb70
-
01-18-2019 #8
Registered User
- Join Date
- Oct 2008
- Location
- Toronto, Canada
- Posts
- 111
I don't have 1st hand experience with the Mcleod product but they have 2 TOB's .....#1300 for measurements A less than 3" & the #1400 one for measurements A more than 3". Double check any notes you might have. https://www.mcleodracing.com/index.p...-bearings.html
Another thing is the air gap, approx. .150" on a single disc or .200" on a dual disc but depends upon maufacturers.
I've decided to use Ram #78131 for my 5spd conversion but I'm not there yet.
-
Reply With Quote
