Marquez design

[BullittCustoms]

Anyone know where to get a Marquez 69 camaro valance and lights? Are they even is business?

Derek

[raustinss]

This seems to be a revolving question I know someone ask this just a few weeks back

[dhutton]

Their website is back up and says call to order while they rebuild the site.

http://marquezdesign.contrabandrides.com

Don

[ARAD RS]

Made many, many, many calls and emails. Never received a return call or email response.
About a 2 or 3 months ago while passing through Sacramento, I did a drive by their advertised Triangle Ct, Sacramento location during their advertised business hours.
Not even close to any idea as if they were in business at that location. No Business signage, No mail box, No life, no Movement, No automotive anything at the address. A desolate location.

Their Facebook page has not been updated in a long time.

Good luck.

[SD67]

They had a booth at SEMA but seem to be hit or miss. Great products though.

[fun2run]

The front valance last I spoke with them about three years ago was no longer going to be made. At that time they said the mold had deteriorated and they were no longer going to produce the valance due to low sales and cost to produce.

[dhutton]

I’ve got a valance, lights and bumper squirreled away for just that reason. You have to grab them when you can. I also had a valance and lights that I got on the forum a while ago but sold them to Kevin.

Don

[BullittCustoms]

Well dang!! If anyone has one for sale let me know.... Lights and Valance... Does anyone make a similar?

[dhutton]

Well dang!! If anyone has one for sale let me know.... Lights and Valance... Does anyone make a similar?

Your only other option is Anvil Auto as far as I know. Here’s a pic on my car with their spoiler. Replaces fender extensions too.

Don

[Bad Bowtie]

This makes me more than a little nervous w/ Marquez, I am looking at his rear taillights for a 68 Camaro and now may have to look at other options. I had bought a set from them about 5-6 years ago and if I recall it took a while to get them back then but I think it was because they had so many orders, but at least I could get them.

BB

[dhutton]

This makes me more than a little nervous w/ Marquez, I am looking at his rear taillights for a 68 Camaro and now may have to look at other options. I had bought a set from them about 5-6 years ago and if I recall it took a while to get them back then but I think it was because they had so many orders, but at least I could get them.

BB

I think you should be ok with billet parts. It’s the fiberglass parts that are risky imho. I heard that his process was not VOC compliant and he needed to retool to be compliant.

Don

[BullittCustoms]

Your only other option is Anvil Auto as far as I know. Here’s a pic on my car with their spoiler. Replaces fender extensions too.

Don

That was the next option for sure.... Car looks killer!!

[dhutton]

That was the next option for sure.... Car looks killer!!

Some like it and some don’t. I have a Ford loving friend who says it looks like a Hobbit.

Don

[Bad Bowtie]

I think you should be ok with billet parts. It’s the fiberglass parts that are risky imho. I heard that his process was not VOC compliant and he needed to retool to be compliant.

Don

Thanks Don, that's good to know.

BB

[icemanrd19]

thats why i went with MCB when ordering my marquez tail lights. I knew if MCB could get me the parts on time i was going to do alot of business with MCB. MCB shipped the product on time and after that i spent around 20k in parts alone

[weircc]

Marquez has great products. But some of the worst customer support I ever seen!! I just spoke with MCB a couple of days ago they haven't heard from them either. Fesler also has some nice products and carry some things very similar maybe check them.