XXR 531 Wheels- Closeout Specials!

[Schwartz Performance]

Hey guys.
We're an XXR Wheels dealer, have been for a couple years, and have used XXR's on several builds including our 65 Tempest, Mark's 74 Gremlin, and all 3 of Dan Howe's car/trucks.

They have some blowouts currently going on that I thought i'd share with you. They're really good deals, specifically on 19" diameters.

Keep in mind:
-Blowouts/clearance items mean they will not make them again!
-Bend a rim and you may not find a replacement.
-Finishes may be slightly different depending on the batch they were made
-Limited size / offset; although this is the case with many 1-piece wheels anyway.

So here we go.

The XXR 531 wheel is a nice looking wheel!
However being a 1 piece wheel there is no option in center bore. These are all 73.1mm. There is enough room to machine/grind out the center bore so your larger hub will fit if needed.
This means that you may not be able to run the center cap though. Just a heads up.
All of those builds I listed above, we have sent a pair out to Weldcraft Wheels & had them widened to 12 or 12.5" as well, so that's another option.

They currently have good stock on the following finishes, 19-inch diameters, and back spacing:

_____________________________________________

*PLATINUM FINISH (Shiny silver/chrome style powdercoat)
19x8.5, 5x120mm (aka ~4.75" BP GM):

• 35mm offset aka 6.125" BS
• QUANTITY 20+ AVAILABLE AS OF 10/12/18
• YOUR PRICE IS $180/ea AND FREE SHIPPING IF BUYING 4 WHEELS

____________________________________________



*PLATINUM FINISH (Shiny silver/chrome style powdercoat)
19x8.5, 5x4.5" BP (Ford/Mopar):

• 15mm offset aka 5.34" BS
• QUANTITY 6 AVAILABLE AS OF 10/12/18
• YOUR PRICE IS $180/ea AND FREE SHIPPING IF BUYING 4 WHEELS

_____________________________________________

*BLACK PLATINUM FINISH (Shiny black powdercoat, almost black chrome but a little lighter)
19x8.5, 5x4.5" BP (Ford/Mopar):

• 15mm offset aka 5.34" BS
• QUANTITY 10 AVAILABLE AS OF 10/12/18
• YOUR PRICE IS $180/ea AND FREE SHIPPING IF BUYING 4 WHEELS

_____________________________________________

*MACHINED w/BLACK FINISH (Gloss black powdercoat on wheel but with machined face and lip)
19x8.5, 5x4.5" BP (Ford/Mopar):

• 15mm offset aka 5.34" BS
• QUANTITY 6 AVAILABLE AS OF 10/12/18
• YOUR PRICE IS $160/ea AND FREE SHIPPING IF BUYING 4 WHEELS

_____________________________________________

*BLACK w/MACHINED LIP FINISH (Gloss black powdercoat with machined lip)
19x10, DUAL 5x4.5"/5x120mm BP (Ford/Mopar/GM):

• 35mm offset aka 6.878" BS
• QUANTITY 6 AVAILABLE AS OF 10/12/18
• YOUR PRICE IS $160/ea AND FREE SHIPPING IF BUYING 4 WHEELS

_____________________________________________

*PLATINUM FINISH (Shiny silver/chrome style powdercoat)
19x11, DUAL 5x4.5"/5x120mm BP (Ford/Mopar/GM):

• 35mm offset aka 6.59" BS
• QUANTITY 50 AVAILABLE AS OF 10/12/18
• YOUR PRICE IS $180/ea AND FREE SHIPPING IF BUYING 4 WHEELS

_____________________________________________

*CHROMIUM BLACK w/MACHINED LIP FINISH (Gloss, almost like transparent dark grey powdercoat with machined/clear lip)
19x11, DUAL 5x4.5"/5x120mm BP (Ford/Mopar/GM):

• 35mm offset aka 6.59" BS
• QUANTITY 20+ AVAILABLE AS OF 10/12/18
• YOUR PRICE IS $160/ea AND FREE SHIPPING IF BUYING 4 WHEELS

Regarding specific vehicle fitment, I cannot help you with that. I have fitment details for most of OUR chassis but not stock vehicles. So if you need help with that, I'm not your guy. These are not custom wheels. They're overseas-produced 1-piece cast wheels, therefore you may need spacers or adapters to make them fit your application. These 19" wheels will fit over most 14" brakes; at least Baer and Wilwood, I have confirmed that. Not sure about Brembo or other OE big brakes.

Call to order, or PM for more information.

Free shipping applies to 4 wheels purchased at the same time, and within the 48 states/USA, residential or commercial addresses.

PICTURES:

Platinum finish


Chromium black/Machined lip


Black platinum


Black w/machined lip