2nd generation camaro parts

[detullis]

I am beginning a Pro-RestoMod project. Just completed the dis-mantling of the car. have may okay to real good conditinparts i would lik to sell and pass on to someone that needs them. This is what I have . i AM OPEN TO TRADES, SWAPS, ETC. for things that I will need in the future.

a. (1) - 327 small block, 2 bolt, cast iron from a 69 Chevy car, rebdild started never cmpleted, new heads
b. (1) - 327 small Block, 4 bolt??, cast iron, froma chevy truck, never rebuilt
c. (1) - 307/327?? small block, 2 bolt, cast iron
d. (1) - Turbo 400 with deep pan.
e. (1) - Camelback head - original from about 1968
f. (1) - Radiator Support Bracket - real good condition
g. (1) - Front end subframe, w sterring assembly and disc brakes – real good condition
(1) - Includes Rancho 2” drop coil springs
h. (1) Gas Evap Canister - good, do not know if it is functionai
i. (1) - HVAC System parts – good, most all parts including original compressor (needs rebuilding) and condenser coil
j. (1) - Heater System – okay, core condition unknown

8. k. (1) - Vacumn Boost Unit w/ large master cylinder for rear disc brakes– good

9. l. (1) - Gas pedal - good

m.(1) - Steering Column – standard – good with out steering wheel

1 n. (1) - Original Steering Wheel

0. (1) - Driver Seat – good, broken upper post
p. (1) - Passenger seat - good
q. - Interior Door Panels, pvc panels, some white, some black, all panted black years ago.

C r. (1) - carpet, black loop – good, after market replacement of 20 years ago. one hole near dimmer switch hole.

1 s. (1) - Dash Instrument Cluster – good and working last time driven. mounting holes broken off, top half of holes

1 t. (1) - Dimmer Switch – good and working last time driven

W u. (1) -HVAC Control Panel – good, mixer bracket is broken, have extra bracket needed for repair.



2 v. (1) - Rear Window Glass, good, some scratches from sander at edges, minor, can be buffed out. has decals

2 w. (2) - 15 x 7 Wheels - Keystone, Classic Black, good

2 x. (2) - 15 x 8 Wheels - Keystone, Classic Black, good

y. (1) - 12 Bolt Rear End with one new Axle, disc brakes from 1980 firebird - good - Sold

z. (1) - Misc Engine Parts
a. 600 cfm Carter Carb - good

b. Edelbrock High rise Value covers (1 set) - good

c. Square Bore Aluminum manifold
d. cast iron manifold
e. Edlebrock triangle air cleaner
f. Alternator
g. Power Steering pump.


2 aa. (1) Drive Shaft – Turbo 400 to 12 Bolt, steel, - good

bb. (1) Hood – standard, 2 small dents, 8 holes from fiberglass scoop, holes have been filled years ago with bondo.
cc. (1) all of the electrical system.
dd. (1) some trim - good condition for 40 years

I have everything that would have come off the orignal car, except some parts for the engine

[jamminj007]

That doesn’t sound like 2nd gen parts to me and a 12 bolt rear from an 80 firebird sounds really sketchy!
1 post?

[Bygblok]

That doesn’t sound like 2nd gen parts to me and a 12 bolt rear from an 80 firebird sounds really sketchy!
1 post?

Why not? It’s very common to use firebird disc brakes on a 2nd gen. Bolt on to an original 70 model 12-bolt. Open your mind grasshopper.........

[badazz81z28]

What year is the car?

[Zanie]

asking price and location.....per rules