Results 1 to 3 of 3
Thread: c5 caliper question
-
09-21-2004 #1
Registered User
- Join Date
- Jul 2003
- Location
- allen, texas
- Posts
- 229
c5 caliper question
I am planning out a c5 caliper swap on my 70 impala but the c5 calipers are trailing and my cars are leading, so if I swap the calipers to the opposite side the bleeder screws are facing the correct way, but first. Are the c5 calpiers stagger bore so symmetrical, and if they are stagger bore will there be any problems with this swap? thanks
-
09-21-2004 #2
Registered User
- Join Date
- Aug 2004
- Location
- Prescott Arizona
- Posts
- 379
Bores are equal, 40mm.
Brian D
Snotty Bimmer driver.
09-21-2004 #3
Registered User
- Join Date
- Jul 2003
- Location
- allen, texas
- Posts
- 229
thanks, if the bores are equal i shouldn't have any problems, does anyone know what master cylinder would be best for this? It has power brakes now and when i do the c5 calipers i'm going to do ls1 camaro rear discs. i have a master off of an 86 trans am with 4 wheel discs would this be ok?
Reply With Quote
