Results 1 to 20 of 20
-
04-15-2017 #1Registered User
- Join Date
- Apr 2017
- Location
- TX
- Posts
- 138
BMW E90 E92 E93 front seat wiring
I am installing E93 convertible seats in my Cutlass. The problem is that they will time out and become unresponsive after a few seconds. If you disconnect the power or ground wires they work again for a few seconds and then time out again. I have tried wiring them different ways but no luck. I have done tons of research on this site and others but cannot find the solution. In other threads here people have had success by reducing voltage to 5v on one of the power wires. I did this but it makes no difference, same thing. Is there somebody here who has figured this out? I am about to just install them like they are with a toggle switch to interrupt the power supply but I would like to wire them correctly.
Thanks
Dan