Page 2 of 2 FirstFirst 1 2
Results 21 to 22 of 22
  1. #21
    Join Date
    Mar 2019
    Posts
    1

    Default

    I would like to get information on the controller also. Been looking everywhere for one.

  2. #22
    Join Date
    Apr 2014
    Posts
    38
    Country Flag: United States

    Default

    Where did you find that adapter?

    Quote Originally Posted by cmcnitt View Post
    I don't have any good videos but here's a few:


    video of first time trying it:


    transbraking with sbc


    dynoing it, i ran 6th gear with converter locked, with pull made about 740rwp


    and failed attempt at the texas mile
    https://www.youtube.com/watch?v=rDo18OigXd4

    pics
    this shows how a ls wheel is too big to fit inside of the bellhousing.
    I've been running a 153 tooth plate however i had to modify the starter for it to work.
    I'll be using a 1" spacer / adapter next time so the flexplate doesn't have to reach into trans
    Attachment 151528

    this is the first adapter, it's only 7/16" so the flexplate sticks out past it.
    Attachment 151529

    I'll be using 2 plates like this, 1/2" each
    Attachment 151530



    the computer i'm using. if i had to do it again i'd just buy the pcs controller or similar
    Attachment 151531

    the converter pilot is 1.337", i just cut one out of aluminum. I'm make a steel one next time
    Attachment 151532

    this kinda shows it's size, i did have to open up the tunnel a little and will open it up more for the driveshaft going forward
    Attachment 151533


Page 2 of 2 FirstFirst 1 2


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •