Results 361 to 380 of 583
Thread: Pro-touring 72 Camaro SS
-
08-24-2020 #361Registered User
- Join Date
- Oct 2016
- Posts
- 556
Thanks a lot
Yes I'm still running the standard lenght ARP studs with the corvette hubs and bought these gorilla lug nuts
https://www.summitracing.com/parts/gor-21133etxl
After this photo I discovered that I was wrong with the offset cause I did not know that we had to add 1/2" to the offset in the backspacing formula so I had to buy a 15mm spacer.
I did not verify again but with a 15mm spacer with those wheels or wheels with the good offset, it's possible that 380mm brake kits fit.
The good offset with a 9.5 wheel width from apex would be 22mm
-
08-25-2020 #362Registered User
- Join Date
- Sep 2006
- Posts
- 3
Thanks. I think I’m going to go your route and just use the extended thread lugs.
-
08-25-2020 #363Registered User
- Join Date
- Oct 2016
- Posts
- 556
You are welcome ! You just have to be sure that you have at least between 6 to 8 full turns.
-
08-28-2020 #364