Page 12 of 12 FirstFirst ... 2 7 8 9 10 11 12
Results 221 to 233 of 233
  1. #221
    Join Date
    Oct 2016
    Posts
    261
    Can't do better.



  2. #222
    Join Date
    Oct 2016
    Posts
    261
    Received the rear window defroster kit, looks great and easy to install.






  3. #223
    Join Date
    Oct 2016
    Posts
    261
    sanding with 80 120 180 240 400 800 1200 2000 then sanding by hand at 2000 and polishing, about 4hours to do that and this is still not perfect....




  4. #224
    Join Date
    Oct 2016
    Posts
    261
    here are the services reports from ID for my injectors, I understand now why I had issues with throttle, 1st is before cleaning, 2nd after cleaning and 3rd after re calibration and 1 replacement. can't wait to receive them and drive again. I've changed my fuel filter to be sure nothing could go wrong now.








  5. #225
    Join Date
    Oct 2016
    Posts
    261
    Finally removed the fuel tank and found a very small amount of rust inside, maybe the reason of flow deviation, so I ve changed the 2 pump filters and waiting for a fuel tank cleaning kit from Restom that is supposed to be a number 1 kit for fuel tank restauration.



  6. #226
    Join Date
    Apr 2017
    Posts
    4
    You bought the Restom PAC2030?
    I also bought it two weeks ago to remove rust from my golf and in the futur the camaro.

  7. #227
    Join Date
    Oct 2016
    Posts
    261
    Sorry I did not see your comment, following link the restom kit I bought

    https://restom.net/traitements-reser...222594643.html

    finally finished intercooler pipes polishing ! about 15 hours to have that mirror finish and ordered the TMI rear seat upholstery






  8. #228
    Join Date
    Jan 2018
    Location
    San Diego
    Posts
    14
    Country Flag: United States
    Quote Originally Posted by berdunord View Post
    Finally I ve re-used all plactic sail panel ...etc all covered with acoustic carpet. The floor will be covered with Renault carpet

    I wonder if I should buy TMI sport XR rear seats upholstery to match with the door panel.









    Man that thing should be Quiet, great for that amazing stereo system.
    Tom

  9. #229
    Join Date
    Oct 2016
    Posts
    261
    this is quiet, the sound is amazing, I love pioneer stuff but engine off LOL ! engine running I need to push the radio to a minimum of 20/40 to hear the music correctly but it's way better than before without all that dynamat sound deadener and acoustic carpet. A great thing too is the temp inside the car, without all dynamat stuff in hot summer I was not able to put my hand on the tunnel more than several seconds, now with the dynamat xtrem + dynaliner + renault carpet, it's a really confortable ambiant temp 60-70F even on cold weather.

  10. #230
    Join Date
    Oct 2016
    Posts
    261
    Finally found 18" wheels from Apex that can fit 15" discs with calipers 18x9 and 18x11 both with a 1/4" spacer should be good.

    front tires 245 40 18 or 275 35 18

    rear tires 285 35 18 or 315 30 18

    To add a bit more modernity, bought a 4 radars reverse parking system. And new paint will be done on february !














  11. #231
    Join Date
    Apr 2017
    Posts
    4
    I like the wheels. BMW wheels ?

  12. #232
    Join Date
    Oct 2016
    Posts
    261
    Yep

  13. #233
    Join Date
    Oct 2016
    Posts
    261
    finnaly driven a bit yesterday and the throttle issues was coming from the injectors, no more problems now, it begins to push hard ! with only 5psi of boost at about 5000 rpm, registered yesterday a 450-500hp log at half throttle, can't wait to put 15 psi !

    Now I'm able to put individual dead time, trim and small pulsewidth in tunerstudio thanks to Injector Dynamics flow deviation sheet

    called Apex yesterday, they confirm that the following wilwood kit fits their EC-7 wheels, wilwood says 221.3 mm between center to caliper, EC-7 is 447.5 mm inside diameter, perfect !








Page 12 of 12 FirstFirst ... 2 7 8 9 10 11 12