1972 C10 Build

[David Sloan]

We are running the oil feed off the little block above the oil filter and the return will T off into a scavenge pump and will return to the valve cover. Thanks man

Thank you sir!
I had thought about running a scavenge pump, I'm a little ways from worrying about it yet but may do that as well to keep the turbo lower.

[Cshenker1121]

Coated the charge pipes
Oil lines ran and scavenge pump done
Wastegate plumbing done
Heat barrier on the floor

[Cshenker1121]

Truck is finally finished and waiting to go to get dyno tuned. Couldn’t be happier.

[Munssey]

Bravo, sir! The truck is coming together nicely. Cant wait to see some action shots.

[Cshenker1121]

Bravo, sir! The truck is coming together nicely. Cant wait to see some action shots.

Thank you!

[Cshenker1121]

I was wiring the flex fuel sensor and got another pic of the engine. I’m very happy with how it turned out. It’s in the trailer ready for the dyno. Just waiting to drop it off. Thanks everyone for the comments I appreciate it

[Cshenker1121]

Finally got it back from the dyno, not too bad

640whp

[kmc3420]

Awesome job!! Thats a pretty good bump..what does the seat of the pants dyno say?

[Cshenker1121]

Awesome job!! Thats a pretty good bump..what does the seat of the pants dyno say?

Scary as hell it’s like a completely different truck, it drives like it use to till you hit 3000-3500.

I like getting on the freeway in 3rd and 4th and just rolling into it. That’s my favorite. It just pulls so hard!


Totally happy with it. We had the make some changes to the scavenge system. I will update with pics when I do that. Gathering parts. Thanks everyone!!!!

[syborg tt]

Wow this truck just keeps getting better and better. There isn’t anything about this truck I would change.

[JustJohn]

What are you using as pass-throughs on the truck bed above?

[C Presley]

Wanted to say you have a great looking Truck! Nice Build! What modifications if any did you have to do to the floor pan around the Tunnel area or rear of the Tunnel to fit the transmission? Please let me know. Pulling parts together for a 68 C10 I'm working on.

[Cshenker1121]

Wow this truck just keeps getting better and better. There isn’t anything about this truck I would change.

Thank you very much! Lots of work, I’m glad you like it

[Cshenker1121]

What are you using as pass-throughs on the truck bed above?

The pass through for the -12 water lines are just some plastic nutted grommets. So they stay in place. Thank you!

[Cshenker1121]

Wanted to say you have a great looking Truck! Nice Build! What modifications if any did you have to do to the floor pan around the Tunnel area or rear of the Tunnel to fit the transmission? Please let me know. Pulling parts together for a 68 C10 I'm working on.

Thank you! I appreciate it.

We just installed a high hump in the floor with no other modifications other than a little massaging to one of the ends. It was a GM reproduction piece for 4wd trucks I believe. You should already have the line stamped in the floor to cut. We installed some nut-certs and that’s what’s holding it in. I’m however going to be putting some silicon down to completely seal it.

Here’s the link to the exact one I got
https://www.brotherstrucks.com/1967-...tinfo/HHC6772/

Good luck on your build!

[C Presley]

Dude, again Nice Build! Thanks for the link.

[Cshenker1121]

Dude, again Nice Build! Thanks for the link.

Thank you very much and your welcome!

[kmc3420]

Scary as hell it’s like a completely different truck, it drives like it use to till you hit 3000-3500.

I like getting on the freeway in 3rd and 4th and just rolling into it. That’s my favorite. It just pulls so hard!


Totally happy with it. We had the make some changes to the scavenge system. I will update with pics when I do that. Gathering parts. Thanks everyone!!!!

haha!! Awesome and glad you are getting to enjoy this thing. Be safe!

[Cshenker1121]

haha!! Awesome and glad you are getting to enjoy this thing. Be safe!

Thank you sir!

[tm5nardo]

Amazing build. Nice job! Would love to see it in action.