Results 1 to 4 of 4
Thread: 1947 Chevy Sport Coupe
-
08-02-2021 #1
Registered User
- Join Date
- Sep 2008
- Posts
- 34
1947 Chevy Sport Coupe
Big fan of the sight and a lot of great information on here. I had a 66 Mustang Twin Turbo on here a few years ago so I hope this build is forum appropriate. Used the 1947 frame, added a mustang 2 front and cut off the rear, added 2x4 rectangle and added the 4 bar for the narrowed 9". It's a 98 5.7 with a T56 and the Direct Port is from Racehead Engineering in Australia. Working on the body now. Widened the stock wheel wells 5". Shaved drip rails and Kindig handles.
-
08-05-2021 #2
Registered User
- Join Date
- Dec 2010
- Location
- Germany
- Posts
- 68
Wow, this is a very nice made engine and engine color!
Please tell more about the engine and parts .
08-06-2021 #3
Registered User
- Join Date
- Nov 2018
- Posts
- 645
Looks like you're in the right place. That engine/trans color looks really sharp, but I wonder if there's enough belt wrap on the water pump. I've always liked those old 2 doors and if I was going to do a pre-1970s car, something like that is what I'd want to do.
08-07-2021 #4
Registered User
- Join Date
- Nov 2006
- Location
- Ma.
- Posts
- 5,567
Great project! I love the stack intake, it's going to look nice under trhat hood.
Wayne
Car FINALLY home !!!!!! lol
Project FNQUIK https://www.pro-touring.com/showthre...ghlight=FNQUIK
Reply With Quote
