Results 1 to 3 of 3
-
08-03-2016 #1
Registered User
- Join Date
- Jul 2014
- Posts
- 48
Classic Industries repair panels?
Hello,
I am going to be replacing the floor pans (one piece unit), trunk pan, and full length frame rails. I was wondering how their quality is compared to other replacement part companies?
Thanks,
Travis
-
08-03-2016 #2
Registered User
- Join Date
- Jul 2013
- Location
- Gilbert, AZ
- Posts
- 934
Does it say what brand? It's not as much Classic Industries, as it is say Dynacorn, Goodmark, OER, or AMD. There's a lot of variance between the groups, and there might even be some parts that are the same stamping. I know I had a partial quarter skin and door skin from Dynacorn for my Firebird, the edges of the quarter were so rippled, it wasn't worth the effort. And the gauge was much thinner, the door skin had way too many dents and dings by the time I got it fully onto the door. Ended up buying an original quarter and usable door. Meanwhile, the Goodmark (I believe, if not, OER) tailpan was very good, and the correct thick gauge, I was very happy with that.
Josh Campbell- Pushing the limits of my HOA since 2011
71 Firebird- 455, Ridetech front suspension. https://www.pro-touring.com/threads/...04#post1124504
67 Camaro RS/SS clone, Speedtech front suspension, coilovers, soon to get LT1/T56.
82 Z28- cheapie beater, soon to get a 406.
66 Mustang coupe- 393, T-5, sold. https://www.pro-touring.com/threads/...-Coupe-GT393-C
-
08-03-2016 #3
Registered User
- Join Date
- Jul 2014
- Posts
- 48
It looks like they are OER.
-
Reply With Quote
