69 Camaro Project Ground Zero

[Rick2964]

Dynamat Extreme and Drive Junky frontrunner. Good stuff

[joeko23]

Awesome colors, the engine bay will be satin black or are you going with the grey from the wheels?

[Rick2964]

Keeping engine bay satin black. Rad support and fender tubs come back from powder coat this week. Engine is black also....

[jlwdvm]

I would check for clearance on the brake line nipple area on your rear end. I found that mine was occasionally hitting the floor board (I have a 9" and ridetech 4-link as well).

[Rick2964]

I would check for clearance on the brake line nipple area on your rear end. I found that mine was occasionally hitting the floor board (I have a 9" and ridetech 4-link as well).

Once I get this Raptor stuff completed Ill do another assembly and check clearance and ride height and compression. I forsee many little glitches in my future. Thanks

[Rick2964]

Finally wheels on the ground and suspension is in!

[Rick2964]

Finally getting some more time into the car. Working with the AAW kit has been nice. Gauges and AC wiring coming together.

[Rick2964]

Took me a while to decide where to mount ECU and fuse box. Modified an Ironworks bracket which i think should hide well under the fender but still have access. For the fust box just fabbed up a quick braket and ran the wires about as far as they would go near the RS headlight harness.

[Rick2964]

Just more garage assembly.. Rear end upper ridetech brackets finally welded and painted. E brake took some effort to clear the crossmember. Happy with the progess so far.

[Zoomin]

Just love the looks of those big fat tires stuffed in there. The whole car looks great!

[ryeguy2006a]

Looks great! What ebrake cables are those? I need to get my ebrakes functional this winter and that looks super clean.

[Rick2964]

They come in a Wilwood box and sold as Wilwood but I think they are actually Lokar... You will have issues with the factory style thread size on the ebrake cable that comes through the firewall. I just drilled out the hold down block that comes with the kit and used nuts to lock it in place.

[oleyeller]

Give these guys a call and go to their site, http://www.controlcables.com they will make anything you want for park brake cables or anything else for that matter ..... great guys, turned mine around it 6 days....

[Rick2964]

Front end finally back together. Happy I chose to go with the hockey stripes...

[Rick2964]

2016 center console finally fitting better along with the new Recaro GT Sportster seats.....

[Bugzilla]

Great choice on the seats. I had the same ones in another car and absolutely loved them. Glad you did the side stripes as well. They help pull off a 2 tone look which I like.

[Rick2964]

Some updates on my project. Deluxe interior all finished including narrowed back seat. Recaro GT final fit before carpet. Air intake with side closeout (Thanks Frank)

[Rick2964]

A few more updates

[Rick2964]

Donut Derelicts Huntington Beach CA

[C Presley]

Brother, that's a very nice build!