The Internet Build of "Bad Intent"

[rfalker1]

Just want to share my odd build, i have hands all over, but never quite touched it, while everything was watched over and picked out with the knowledge I gained from the internet and the good people at this site... of course with my fair share of mistakes.

I guess I will update and tell the plans of this car for those who read the first post before they venture in the thread

Engine/ Drivetrain/ Exhaust

383 Crate Engine 450hp at flywheel
700r4 tranny
and 3:55 gears in the back
BeCool Big Block Radiator
Serpentine Belt System
Jet Hot Hooker Super Comp Headers
Spintech Side exit exhaust

Brakes
Kore 3 Big Brake Kit (4 wheel Disc)
Manual Brakes
Wilwood master cylinder


Suspension
Hotchkis 80015 TVS Suspension Kit
Sport Coils
Sport Sway Bars
Chassis Max Sway Bar Brace
Heavy Duty Tie Rod Sleeves
Sport Leaf Springs
Bilstein HPS 1000 Shock Absorbers
Speed Tech Upper and Lower Control Arms
Hotchkis 4007 Sub Frame Connectors
Hotchkis Rear Shock Tower Brace
Hotchkis Inner & Outer Tie Rod Ends
Hotchkis Idler Arm
Moog Pitman Arm
Derale 13212 Power Steering Cooler
AGR Billet Cruiser Steering Box
Adjustable 16/13 to 1 Ratio
TSW Cadwell Wheels

Saftey
Morrison 3 point Belts
Ariza Racing Seats


Sound System
Pioneer Head Unit
Polk Audio 6.5 (installed in Screaming Performance Custom Kick Panels)
Polk Audio 6.9
Jl W7 10" Sub
JL AMps
Dynomat Floor, Dynaliner for Header Heat
Viper Alarm System



Gauges
Original Dash Gauges
Autometer American Muscle Gaugues

Lighting
Xenon 8000k Hid Bulbs
Detroit Speed RS Electrical
MuscleRodz Camaro RS Taillights

[Rod]

she is sitting kinda high? stock suspension?

[rfalker1]

Lerning about the thread

[rfalker1]

Yes Stock Suspension, with air shocks on the back

[rfalker1]

Learning more about the thread

[rfalker1]

Learning lol

[mc84_zz4]

Nice ride! With that 383 stroker you should be able to easily keep up with the new car, also with less weight, it should feel pretty good. Without the dreaded computer/drive-by-wire pedal delay, you may find it more fun when you open up the can of whoopazz.

[rfalker1]

Thanks, and I hope I can light the street on fire the summer or 2011

[rfalker1]

The Beginning




at Night

[rfalker1]

Then My confusing stage, and not realizing how big 19x10 inch wheels were and how much they can mess up your wheel welds, they however surprisingly fit on the front



But it did get alot of attention

[rfalker1]

Engine finally got pulled, one of the new lights we installed is open, they look awesome



Close Up



This is what came out, the old 350, painted all orange lol

[rfalker1]

What is replacing that is this, bought a 383 crate engines, and made some minor (fun adjustments ;)



Here is a different View

[rfalker1]

First Trouble, Never new this existed, but after some welding and new floor we shall be able to make this look alot better



and



Sniffle

[rfalker1]

Ariza Racing Seats got finished, did the Logo design myself and they look awesome

[CruizinKev]

nice project so far!

[Brad1970]

I'm just upset about the chick sitting on your hood!!! You're a braver man than I to allow that! But sweet ride for sure!

[WS6]

Looks like a good foundation for a build. Best of luck.

[rfalker1]

thanks, its crazy to actually do it because, I never thought I would do much too the car when I got it. And the chick and the hhpd was just one of those nights, I mad sure the heels didn't touch the paint.
Plus thanks for the wish of luck!!!!!!

[rfalker1]

So, we finally got the floor cut!!!! found some crazy stuff and figured out we need to fix the wiring under the dash!!!!


Under VIew


crazy wiring..


Hole, interior view


What came out, (Cardboard!!!!)

[rfalker1]

P.S if anybody has any wiring ideas let me know, I have alot of electrical stuff in the car, but no ac