Results 1 to 5 of 5
Thread: Cold Air Intake
-
10-24-2015 #1
Registered User
- Join Date
- Dec 2011
- Posts
- 118
Cold Air Intake
Wanted to know what size intake tube I should use, 3in. or 4in? Going in a 1985 monte carlo ss with 5.3/ 4l60. All stock with plans to upgrade power & performance.
-
11-05-2015 #2
Registered User
- Join Date
- Aug 2001
- Location
- Connecticut
- Posts
- 1,570
4" is pretty standard
1968 Camaro RS/SS, LS7 with Katech mods, T56 Magnum, C6Z06 Brakes
1968 Camaro RS Convertible LS3/480hp/4L70E
1962 Corvette 327-340hp stock
1963 Corvette Split Window Coupe
1967 Corvette L79 convertible
2006 Corvette Z06
2011 Corvette GS convertible
11-05-2015 #3
Registered User
- Join Date
- Jul 2006
- Location
- Pensacola, FL
- Posts
- 1,263
I'd use 3.5". It will match up nicely with the truck MAF sensor and throttle body.
11-06-2015 #4
Registered User
- Join Date
- Mar 2004
- Location
- Mid-Michigan
- Posts
- 2,764
Measure the MAF sensor and buy accordingly.
Going a bit bigger will not hurt a thing but going huge will gain you nothing but turbulence at the sensor when the air tries to enter it.
MarkMark:
"Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
This my Bad Ast thread...
https://www.pro-touring.com/showthre...roject-Faze-II
This is my Fotki album...
http://astroracer.fotki.com/
11-07-2015 #5
Registered User
- Join Date
- Dec 2011
- Posts
- 118
Ok. Thanks for the advice. I will messure the sensor as soon as I get back to it.
Reply With Quote
