Chevrolet Zl1/CTSV Brembo Retrofit brake caliper Brackets

[ChevelleNV]

These are No Longer Available....

[rchaskin]

Wow...that is really nice.

You get an A plus for this!!

[ChevelleNV]

Wow...that is really nice.

You get an A plus for this!!

Thanks....

[cwylie]

Yeah those look really nice. Good work!

[GeoffP]

Where's the Like button?

[Hybrid 69]

What size wheels would be required with these?

[ChevelleNV]

18 inch, same as a 5th gen

[Buryingthesun]

Ohhhh I like this, Might sell my Wilwood calipers and rotors and convert to this!

[GeoffP]

If I knew that my current Wilwood hubs are the same as what you used, I would be all over this! My car has the 12.19" kit on the front - thinking the hub offset is different from what I see in your pictures.

[ChevelleNV]

If I knew that my current Wilwood hubs are the same as what you used, I would be all over this! My car has the 12.19" kit on the front - thinking the hub offset is different from what I see in your pictures.

should be pretty easy to tell which hub you have just look at the instruction sheet and it has the part number.. the hub I have is the one that comes with the kit for a Chevelle from wilwood...

[ChevelleNV]

Delete

[GeoffP]

The difference in my hubs are on Dimension N. Yours are 2.37 and mine are 2.39. It could probably be made to work but it looks like the rotors will be a major road block cost wise. Still a good deal for someone who has already sourced those parts.

[ChevelleNV]

The difference in my hubs are on Dimension N. Yours are 2.37 and mine are 2.39. It could probably be made to work but it looks like the rotors will be a major road block cost wise. Still a good deal for someone who has already sourced those parts.

Why do you say the rotors are a road block? i picked up a set of calipers and rotors off a wrecked ZL1 for less than 1200.00 off ebay... just gotta shop around. and with the .020 difference, they should fit...and if you wanted to make sure you could send one hub and I would double check for you

[ChevelleNV]

fyi here is a set of fronts with rotors for 1495.00 http://www.ebay.com/itm/2012-2013-20...be2a7b&vxp=mtr

[ChevelleNV]

...

[ChevelleNV]

...

[1nastyZ06]

Is there a difference in mounting points for these on the ridetech spindles compared to C6 spindles? Or are the mounting points the same?

[ChevelleNV]

Is there a difference in mounting points for these on the ridetech spindles compared to C6 spindles? Or are the mounting points the same?

I honestly couldn't tell you, I don't have a set of C6 spindles I can compare to...if you have one laying around and really want to know, send it to me. ill compare them and send it back to you. It will also give me a chance to digitize the spindle and hub

[1nastyZ06]

Ok. PM me with your address and phone number and I will pull one off my sub frame and send it to you.

Thanks again
Wes

[ChevelleNV]

Making another production run of these, if anyone wants a set let me know....